48724 0 Wall plate crushed stone of Stone Art, L 53,5 x W 16 cm
€22.50
Delivery time: 2-4 Werktage
Article no.: 48724
Product information "0 Wall plate crushed stone of Stone Art, L 53,5 x W 16 cm"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife.
Content: 0.086 qm (€261.63 / 1 qm)
currently not available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife. A realistic, weathered surface is provided by some broken and incomplete bricks.
Content: 0.0856 qm (€262.85 / 1 qm)
currently not available
Customers also bought
In connection with the eyehook bending pliers item 4198 universal use for every mast distance from 140 to 160 mm. Ø 0,6 mm.
available
Bistable relay module with 4 simultaneously switching relays.The relay converts impulses, sent by digital decoders, push-button panels, switching tracks or track contacts into continuous current. To switch lamps, signals, etc. and block signal logic. End position switchable by impulse or continuous signal. Feedback is provided in connection with the universal push-button panel, item 5549. Attached coupling lever. Current consumption: 400 mA. Contact load each changeover contact max. 1,5 A.
available
The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife.
Content: 0.085 qm (€264.71 / 1 qm)
available
Height: 4,5 cm. Operating voltage: 16 V ~.
available
Kit.With connection system. Manufactured in two-colour injection moulding process. L 20.0 x W 13.5 x H 12.5 cmLevel of difficulty: 2 (advanced)
available
Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module.Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz.Suitable vehicles: 8040, 8160.L 2.5 x W 1.2 x H 1.1 mm
available