48730 0 Roof plate plain tile of Stone Art, L 54 x W 16 cm

Fits perfectly with items 8011 and 8030 MB ACTROS 3-axle articulate truck. The semitrailer with rear lighting is equipped with a 5-pole plug-in coupling for the connection to the respective vehicle. By connecting to the tractor, the following functions are transferred to the trailer:• Infrared transmitter for distance control• Braking and reversing lights• Direction indicators right/left and warning lights controllableL 9.8 x W 2.8 x H 3.8 - 8.6 cm

available

This special point machine is a powerful, silent drive with its respective digital decoder for installation in Märklin and Trix C road bed points. The decoder is located in the cable making the drive particularly compact. The point machine stands out for the prototypical slow movement of the point blades. Speed and motion are controlled electronically and ensure a sensitive drive. If – due to the characteristics of your turnout – the direction of the turnout does not fit with the switching direction of the command station, it is possible to set the point motor to reverse mode. The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations. Analogue mode is possible. Additional switching outputs for relays or LEDs and for a conventional feedback and frog polarisation complete the functions of the point machine. Their function is configurable.Märklin C turnouts:24611 left hand turnout24612 right hand turnout24624 double slip switch DKW24630 three way turnout (2.pieces drives)20671 left curved turnout with manual hand lever20672 right curved turnout with manual hand lever24671 left curved turnout24672 right curved turnout24711 left hand wide radius turnout24712 right hand wide radius turnout24771 curved turnout left24772 curved turnout rightTrix C turnouts:62611 C track left hand turnout62612 C track right hand turnout62624 C track double slip switch 62671 C track left curved turnout62672 C track right curved turnout62711 left hand wide radius turnout62712 right hand wide radius turnout62771 curved turnout left62772 curved turnout right

available

8 impulse outputs to switch turnouts and other solenoid accessories.The switches for the setting of 80 possible addresses are accessible from the outside. An external power supply can be connected to reduce load, this ensures the reliable switching of accessories even in case of many trains. Powerful impulse outputs with short-circuit protection, max. current 2 A. Positive switching impulses. Compatible with the Commander, Märklin Digital and Uhlenbrock Intellibox.

available

The universal electronics for buses offer compact solutions for retrofitting coach and transit buses with the proven driving characteristics of CarMotion trucks. The slim module (W 12.5 mm x L 26.5 mm) is particularly suited for tight installation spaces and operates in conjunction with the H0 gearbox and motor, item 8426. Power is supplied by one 120 mAh rechargeable battery included in the set. This module is designed exclusively for use with this specific motor and battery configuration.An additional trim-to-size distribution board (approx.. W 7 mm x L 25 mm) can be shortened to L 17 mm and facilitates the connection of LEDs for lighting purposes and enables extra lighting effects.An expansion interface is provided for additional modules. The LEDs and the sensors come pre-wired with enamelled wires, making installation straightforward.Expansion kits for further lighting effects will be available in the future.Set includes:Main board, distribution board, Hall sensor, charging and programming socket, rechargeable battery, mini board with IR transmitter, mini board with IR receiver, mini board with reed switch and driver’s cab lighting, 4 mini boards for interior bus lighting, mini board with trailer connector.

currently not available

Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 3 LEDs, maintenance free. Signal pictures Hp0, Hp1 and Hp2. Suitable control module: item 5222. Height: 7,9 cm.

available

The wall plates from the stone art series consist of weather resistant sediment composite. This material creates an unmatched realistic stone surface. Due to the two-coloured design, the gaps are pointed out optically. The plates are flexible and can be easily cut with a knife. A realistic, weathered surface is provided by some broken and incomplete clinker bricks.

available