2625 H0 Low side car with cement mixer, functional model for 3-rail systems **discontinued

Couple in bed at loveplay. The woman is moving. The figures have elastic bodies for realistic movement. With underfloor drive unit. Mounting depth: 39 mm.

available

Our street musician is always ready to play and to perform at his best. Mounting depth: 39 mm. Suitable sound module: Item 5577.

available

Mobile restroom-building with moving door and one construction worker. Suitable for e. g. road works or open-air concerts. The door is opened and closed by electrical underfloor drive unit, e. g. caused by a passing train. Mounting depth: 42 mm. The sound module item 5561 provides suitable sounds.

available

The dancer is fastened to the rotating spinning pole dance rod. The figurecan be transformed into a pole dancer by painting it individually. With underfloor drive unit.Mounting depth: 39 mm

available

Signal in standard construction. Filigree brass mast and authentic varnishing. With base socket for easy mounting. With 2 LEDs maintenance free. Signal aspects Hp0 and Hp1. Suitable control module: item 5221. Height: 6,1 cm.

available

The patented flat drive unit, similar to the one used in the ROBEL, is a perfect fit for the flat construction of this waggon. Between 1958 and 1967 the DB purchased more than 14 200 2-axle platform waggons with tiltable side and end boards. They serve for transporting vehicles and large volume freight. As from 1965 the vehicles without side stakes were classified asKls. The models are suitable for epochs III – VI. Length over buffers: 13 860 mm. Empty weight: 12 100 kg, max. load 27,5 t. With its fine-tuned movement and sound, digital or analogue, this model can fulfil the wishes of many enthusiasts. A sound module providing different sounds and noises is included, and is configurable for a typical diesel- or steam locomotive. RailCom capable digital decoder for DCC/MM and analogue operation, with integrated power-pack for supplying the locomotive while driving over turnouts or tracks with poor electrical contact. Socket for rear lights or other switchable functions are available at both ends. Functions in analogue mode: - Driving forward/reverse, sound active (type and volume configurable via CVs) - Light outputs activeFunctions in digital mode: - Driving forward/reverse - Functions can be separately switched: Sound (type and volume configurable via CVs), signal horn, lightsSockets for NEM 362 couplers available at both ends. One rear light included. With patented pick up shoe. Dimensions: Lob 15,9 x W 3,5 x H 2 cm.

few available