12068 Collector display L 9.7 x W 5.3 x H 5.4 cm

Without vehicle. L 9.5 x W 4.5 x H 6.3 cm

available

Kit. Equipped with a continuous service and repair pit. Continuously accessible for CarMotion vehicles. The 2 roller shutters are preconfigured for the Viessmann roller shutter, item 5172. They come pre-assembled and are suitable for manual operation. The roof is removable. With foundation and office area for industrial halls.L 28.1 x W 14.3 x H 12.2 cm, mounting depth 1.4 cmLevel of difficulty: 2 (advanced)

available

These LED light strips are intended solely for stationary lighting applications, such as simulating neon tubes in buildings or at train platforms. They are made from flexible material. The LED strips are designed for operation with the power modules, items 5215, 5225, or 5208, or the LED dimmer, item 5590, or with DC voltages of approx. 18 V and above. The included resistors allow for brightness adjustment.Recommended operating voltage: 24 V DC, total current without series resistor: 11 mA. Connection cable included.The light strip, equipped with 5 warm-white (2200k) LEDs, has a total length of approx. 17 mm.

currently not available

The two traffic lights are designed for simple traffic scenarios that require opposing signal patterns, such as in single-lane traffic control at construction sites or at a basic intersection to regulate traffic from a side street into a oneway street. The corresponding control module is intended for use with the IR Mini, item 8403, whose infrared commands allow CarMotion vehicles to stopp and start alternately at the lights. The light poles can be removed from their bases, enabling the lights to be mounted like standard traffic lights.

currently not available

Functional model.Like all models of the CarMotion series, the vehicle comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlL 8.5 x W 3.5 x H 4.3 cm

available

With the included stickers, you can customize the signs to fit your needs. A wonderful addition to the Viessmann CarMotion system. The set includes ten signs and one deco sheet featuring stickers for the signs.

available