5020 Electronic welding light

4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

available

Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.

available

The transformer provides model train accessories, e. g. lamps, signals and turnouts with required low voltage. Suitable for all kinds of model train systems. Integrated overload protection avoids overload and short-circuit breakdown by timeous cut-off of the transformer. Technical data: Input voltage 230 V - output voltage 10 and 16 V~, maximum power 52 VA. Dimensions: L 13 x W 7 x H 5 cm.

available

These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

available

2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp1. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available