5046 H0 Coach lighting, 11 LEDs white
€17.50
Delivery time: 2-4 Werktage
Article no.: 5046
weee DE86057721
Product information "H0 Coach lighting, 11 LEDs white"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
2 red LEDs to light rear lights on rail vehicles. Designed to connect with the Viessmann coach lightings item-No. 5046, 5049, 5050, 5076, 5077, 5078 with already integrated series resistors. By use of these components the connection of the LEDs is possible also directly to the rail tension or to the outputs of the function decoders. Diameter LEDs 1,8 mm, cable length ca. 90 mm.
available
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.
available
In each coupler 4 conducting contact areas are integrated. Each wire is up to 0,5 A. Used as fixed trainset formation, cannot be uncoupled automatically, yet easy to separate and to couple! Including connection cable. Fitting NEM 362-shaft.
available
Customers also bought
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.
available
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.
available
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available
The transformer provides model train accessories, e. g. lamps, signals and turnouts with required low voltage. Suitable for all kinds of model train systems. Integrated overload protection avoids overload and short-circuit breakdown by timeous cut-off of the transformer. Technical data: Input voltage 230 V - output voltage 10 and 16 V~, maximum power 52 VA. Dimensions: L 13 x W 7 x H 5 cm.
available
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.
available