Product added to compare
Product information "Ignition module for gas lamps "
Electronics for prototypical control of all Viessmann gas lamps in all scales. Suitable for LED lights, too. After switch-on by using push-button panel the lamps start to flicker like the prototype and slowly increase in brightness. After approx. 5 seconds the lamps will reach full brightness. During operation the lamps flicker occasionally (simulates variations of the gas pressure). Switched off, the lamps will continue to glow with reduced brightness and fully extinguish after approx. 1,5 seconds. 5 separate outputs with different ignition patterns. Each output can drive up to 3 gas lamps. We recommend to connect only one lamp per output as in reality no 2 lamps operate exactly the same way. Switching on / off is facilitated via a separate momentary action switch, e. g. push-button panel item 5547.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Passende Artikel

6411 N Standard gas lamp, green
Prototypical brass mast with base socket for easy mounting. With ignition switch item 5066 you can prototypically simulate the lighting of the gas lamp. Spare bulb: item 6220. Height: 3,5 cm.

€16.50*
available
Stk
6396 H0 Gas lamp, LED warm-white
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 4,8 cm.

€15.95*
available
Stk
6397 H0 Gas lamp double, 2 LEDs warm-white
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 5,5 cm.

€24.50*
available
Stk
6398 H0 Gas lamp triple, 3 LEDs warm-white
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 6 cm.

€29.50*
available
Stk
6911 TT Standard gas lamp green
Prototypical brass mast with base socket for easy mounting. With ignition module for gas lanterns item 5066 the ignition of gas lamps is prototypically simulated. Spare bulb: Item 6220. Height: 4,7 cm.

€16.95*
available
Stk
6011 H0 Standard gas lamp green, LED warm-white
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 5,6 cm.

€15.50*
available
Stk
6012 H0 Swan neck gas lamp green, LED warm-white
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 8 cm.

€16.50*
available
Stk
6013 H0 Gas wall lamp green, LED warm-white
For wall mounting. Maintenance free by LED lighting. Height: 1,6 cm.

€15.50*
available
Stk

Customers also bought

4700 H0 Digital semaphore home signal, single-arm
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp1. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

€86.95*
available
Stk
5803 N St. Andrew`s crosses, 2 pieces
Set with 2 St. Andrew`s crosses without blinker electronics item 5065. Maintenance free due to LED lighting. Height: 1,9 cm. Tip: suitable blinker electronics , item 5065.

€21.95*
available
Stk
5556 Sound module Level Crossing
Experience the model railway with all your senses: The stationary modules add the specific sounds to the animated world. Set complete with module and integrated loudspeaker and connection for external loudspeaker. The volume is of course adjustable. Operating voltage 14 - 24 V DC = or 10 - 16 V AC ~. Suitable for: Level crossings items 5100 (H0), 5104 (H0), 5108 (H0), 5700 (TT), 5900 (N).

€50.50*
available
Stk
5050 H0 Coach lighting, 11 LEDs warm-white
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Stk
5550 Universal on-off switch
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

€23.95*
available
Stk
1538 H0 Welder with flickering welding light
The welder kneels and performs his work in appropriate protective clothing. With realistic welding light by micro-LED offers authentic effect. Mounting depth: 38 mm. Perfectly matching hydraulic lift item 5131 and kibri item 38541 ARAL fuel station.

€33.50*
available
Stk