Product added to compare
Product information "H0 Coach lighting, 11 LEDs yellow, with function decoder"
Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Passende Artikel

5056 H0 Train rear lanterns with LED, 2 pieces
2 red LEDs to light rear lights on rail vehicles. Designed to connect with the Viessmann coach lightings item-No. 5046, 5049, 5050, 5076, 5077, 5078 with already integrated series resistors. By use of these components the connection of the LEDs is possible also directly to the rail tension or to the outputs of the function decoders. Diameter LEDs 1,8 mm, cable length ca. 90 mm.

€6.50*
available
Stk
5048 H0 Conducting couplers, 2-pole, 1 pair
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

€19.50*
available
Stk
5071 H0 Conducting couplers, 4-pole, 1 pair
In each coupler 4 conducting contact areas are integrated. Each wire is up to 0,5 A. Used as fixed trainset formation, cannot be uncoupled automatically, yet easy to separate and to couple! Including connection cable. Fitting NEM 362-shaft.

€24.50*
available
Stk

Customers also bought

5046 H0 Coach lighting, 11 LEDs white
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Stk
5049 H0 Coach lighting, 11 LEDs yellow
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Stk
8429 Magnetic tape 0.5 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.W 0.3 x H 0.05 cm

Content: 5 m (€2.79* / 1 m)

€13.95*
available
Stk
4110 H0 Standard mast
With beam, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,9 cm.

€8.50*
available
Stk
3560 LED warm-white with soldered cables, 5 pieces
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.

€14.50*
available
Stk
8999 Viessmann catalogue 2024/2025/2026 DE/EN
Join us for an exciting journey and gladly discover more of our new and well-established products as well as useful recommendations and hints. No matter what gauge or epoch, we are convinced that you will find the appropriate accessories for your model train layout. With Viessmann you will find the striking combination of brilliant technology and reasonable pricing. Long ago, our lamps and signals have become the undisputed standard and with our animated eMotion series we bring your layouts to life. Our product range is complemented by the RailMotion series of railed vehicles. Our products will help you increase the lifelike character and the eye-catching effect of your model train layout. Of course, you will also be thrilled by the excellent driving characteristics, the realistic sounds, the adequate lighting and the motional effects.

€4.95*
available
Stk