Specialist dealer search

Download Center

Service / Help

Experience since 1988

Product added to compare
Product Compare added Product Compare
Go to homepage
€0.00*
H0 Coach lighting, 11 LEDs white, with function decoder

5078 H0 Coach lighting, 11 LEDs white, with function decoder

€29.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 5078

weee DE86057721

Product information "H0 Coach lighting, 11 LEDs white, with function decoder"
Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
5078 ( 1,563.76 kb )

Passende Artikel

H0 Train rear lanterns with LED, 2 pieces
5056 H0 Train rear lanterns with LED, 2 pieces
2 red LEDs to light rear lights on rail vehicles. Designed to connect with the Viessmann coach lightings item-No. 5046, 5049, 5050, 5076, 5077, 5078 with already integrated series resistors. By use of these components the connection of the LEDs is possible also directly to the rail tension or to the outputs of the function decoders. Diameter LEDs 1,8 mm, cable length ca. 90 mm.

€6.50*
available
Stk
H0 Conducting couplers, 2-pole, 1 pair H0 Conducting couplers, 2-pole, 1 pair
5048 H0 Conducting couplers, 2-pole, 1 pair
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

€19.50*
available
Stk
H0 Conducting couplers, 4-pole, 1 pair
5071 H0 Conducting couplers, 4-pole, 1 pair
In each coupler 4 conducting contact areas are integrated. Each wire is up to 0,5 A. Used as fixed trainset formation, cannot be uncoupled automatically, yet easy to separate and to couple! Including connection cable. Fitting NEM 362-shaft.

€24.50*
available
Stk

Customers also bought

H0 Water crane with swing arms, 2 pieces
39422 H0 Water crane with swing arms, 2 pieces
Kit. L 8.9 x W 2.0 x H 8.3 cmLevel of difficulty: 2 (advanced)

€19.50*
available
Stk
H0 Coach lighting, 11 LEDs white
5046 H0 Coach lighting, 11 LEDs white
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Stk
Rail brown with screws, 2 pieces
6843 Rail brown with screws, 2 pieces
Each 2 x 12-pole.

€7.50*
available
Stk
H0 Coach lighting, 11 LEDs warm-white, with function decoder
5077 H0 Coach lighting, 11 LEDs warm-white, with function decoder
Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connected. Various lighting effects are adjustable, as start-up simulation of track bed inverter or single flickering tubes. The model offers direction depending switching outputs for front- and rear lighting. An additional switching output up to 150 mA capacity completes the functionalities. Power supply by grinder/point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Due to low-loss switching regulator the coach lighting warms up only a bit. Maximum power input 20 mA. Dimensions: L 25,4 x W 0,8 cm.

€29.95*
available
Stk
H0 Coach lighting, 11 LEDs yellow
5049 H0 Coach lighting, 11 LEDs yellow
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Stk
H0 Conducting couplers, 2-pole, 1 pair
5048 H0 Conducting couplers, 2-pole, 1 pair
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

€19.50*
available
Stk