5803 N St. Andrew`s crosses, 2 pieces

4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

available

Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.

available

The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.

available

12 light boxes - each 3 pieces in 4 different sizes and one house lighting LED white. The light boxes provide completely new clear lighting of each single room. For lighting we recommend our LEDs with connection cable in yellow item 6047, white item 6048 and warm-white item 6046, the boards with an LED in yellow item 6007, white item 6008, warm-white item 6006, boards with two LEDs in yellow item 6018, white item 6017 and warm-white item 6021 or the LED with TV simulation item 5079. Light boxes should be fixed inside the house behind the windows. Light is prevented from shining through. Also suitable for TT and N buildings. Dimensions light boxes: L 1,7 x W 1,8 x H 2,6 cm, L 1,7 x W 1,6 x H 2,1 cm, L 1,7 x W 1,2 x H 1,9 cm, L 1,7 x W 1,4 x H 2,3 cm.

available

These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

available

For fastening under the ceiling. Maintenance free by LED lighting.

available