5590 LED dimmer, double

With the programming device you can make various settings as well as software updates on your CarMotion trucks and buses. With an USB cable it is connected to the charging socket of the vehicle and to the USB-A socket of a computer or a hub, adapter or other. The user-friendly operating software communicates with the vehicle, provides information about the charging status, the distance travelled etc. Furthermore, it enables comfortable setting of various vehicle parameters such as speed, active functions, light brightness and many more. In particular, it is used for setting the desired reactions of the vehicles to the commands that can be triggered by the magnet arrangement in the roadway. Moreover, it is easy to copy configurations between vehicles.

available

The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.

available

Level crossing with 2 barriers, powered by 2 separate underfloor drive units. The drive provides slow movement during opening and closing of the barriers. The street can cross an unlimited number of tracks. Board crossing pieces, access ramps and printed road signs are attached. Integrated decoder is multi protocol and recognizes DCC and MM format. For automatic use switching tracks resp. switching contacts item 6840 are required. More information is provided in our signal book item 5299 German version. To build four-arm barriers, item 5107 model with mirrored imprint is required. More connectors offered with items 5105 (2 rail) and 5106 (3 rail). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: item 5556. Barrier length: ca. 6,3 cm.

available

The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm

available

Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 12,4 cm.

available

We revive the good old times. The record runs of course and plays the cool sound of generation Elvis. Maintenance free by LED lighting. Mounting depth: 50 mm. Suitable sound module: Item 5578.

available