6165 H0 House number with LED lighting

These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

available

Ideal for use with the floor interior lighting item 6045. The LEDs can be precisely glued into the racks for individual illuminating of entire floors or individual single windows in buildings of all kinds. Each one LED provides the right brightness. Also available as item 6047 yellow and item 6048 white LED. Same for light boxes of house illumination starter set item 6005.

available

Highly detailed functional lantern for epochs II-III fitting H0 scale waggons. Maintenance free by LED lighting. Scope: 2 LED lights with boards, rectifier and 2 resistors.

available

Signal in standard construction with filigree latticed brass mast. Maintenance free LED lighting. White LEDs for signal aspect Sh1 (shunting trip). Very easy and safe connection via only one plug socket. Required multiplexer item 5229 or 52292 for analogue (limited) and ­digital model train layouts. With base socket for easy installation and connection. With plug and 6 LEDs, maintenance free. Signal aspects Hp0, Hp0/Sh1, Hp1 and Hp2. Height: 7,9 cm.

available

Set consists of 4 St. Andrew`s crosses and one blinker electronics item 5065. Maintenance free by LED lighting. For automatic operation the electronic relay item 5552 and switching tracks resp. the reed contact item 6840 are required. Height: 3,6 cm.

available

The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.

available