Skip to main content Skip to search Skip to main navigation

Product information "Timer train stop "

Allows an automatical stop in station area with soft stop and start movement. Even stopover by shuttle service control module items 5214 and 5204 is possible – one stopover is sufficient for various breakpoints! Push-pull operation is possible. Integrated track occupancy detectors make track- or signal contacts dispensable, works in both directions. Integrated light signal control for both directions with prototypical smooth change of light. The stop time, starting acceleration and braking time are separately adjustable. Useable with AC, DC and digital operation.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Passende Artikel

Shuttle service control module for AC-trains

Average rating of 0 out of 5 stars

5204 Shuttle service control module for AC-trains
Integrated light signal control by prototypical smooth signal pictures. Full automatic and semi-automatic modes are available, in semi-automatic mode the train is started manually with a button. Current situation is shown by 2 LEDs. External power supply, transformer, is required. Provided for analogue locomotives, but limited operation with digital locomotives is possible. This item is not suitable for Märklin metal track. Please contact our customer service.

€105.95*
currently not available
Shuttle service control module for DC-trains

Average rating of 0 out of 5 stars

5214 Shuttle service control module for DC-trains
Easy connection (only 4 cables). Current situation is shown by 4 LEDs. No regulated transformer required. Connection to 10 – 16 V AC voltage or 14 – 22 V DC. The output is DC, so it is not suitable for AC (Märklin) or digital locomotives.

€113.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Customers also bought

Remote control

Average rating of 0 out of 5 stars

8402 Remote control
The remote control facilitates the control of the CarMotion vehicles on the layout as well as a simple configuration of the vehicle. For this purpose the remote control is directed towards the front part of the vehicle where its infrared sensors are located. Distances larger than 50 cm require a very precise alignment of the remote control with the vehicle. Under favourable conditions a distance of up to 1 m is possible. The device is designed for a local control of the vehicles – driving on sight, so to speak. It can be used to start a vehicle – even from an active stop coil – and to stop it at any time. Furthermore, it is possible to set the vehicle speed and other vehicle functions such as lighting, blinking lights etc. For these basic configurations, it is not necessary to connect the vehicle to the programming device. Moreover, the remote control complements the vehicle control via the magnet arrangement underneath the roadway – thus the user can carry out complex operations and has further options to intervene.

€16.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging

Average rating of 0 out of 5 stars

8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
currently not available
Universal on-off switch

Average rating of 0 out of 5 stars

5550 Universal on-off switch
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

€23.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
H0 CarMotion basic starter set, MB ACTROS dump truck with rotating flashing lights, blue

Average rating of 0 out of 5 stars

8000 H0 CarMotion basic starter set, MB ACTROS dump truck with rotating flashing lights, blue
CarMotion basic starter set consisting of item 8010, H0 MB ACTROS dump truck with rotating flashing lights (basic), 1 charger with USB charging cable, item 8400, 12 permanent magnets, item 8431 and 1 magnetic bar.

€235.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Programming device for trucks and buses

Average rating of 0 out of 5 stars

8401 Programming device for trucks and buses
With the programming device you can make various settings as well as software updates on your CarMotion trucks and buses. With an USB cable it is connected to the charging socket of the vehicle and to the USB-A socket of a computer or a hub, adapter or other. The user-friendly operating software communicates with the vehicle, provides information about the charging status, the distance travelled etc. Furthermore, it enables comfortable setting of various vehicle parameters such as speed, active functions, light brightness and many more. In particular, it is used for setting the desired reactions of the vehicles to the commands that can be triggered by the magnet arrangement in the roadway. Moreover, it is easy to copy configurations between vehicles.

€25.95*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
H0 Coach lighting, 11 LEDs warm-white

Average rating of 0 out of 5 stars

5050 H0 Coach lighting, 11 LEDs warm-white
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*
available
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk