Specialist dealer search

Download Center

Service / Help

Experience since 1988

Product added to compare
Product Compare added Product Compare
Go to homepage
€0.00*
Control module for colour light distant signal

5220 Control module for colour light distant signal

€31.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

available
Stk
Article no.: 5220

weee DE86057721
Product information "Control module for colour light distant signal "
Useable in connection with control modules for colour light signals items 5221 – 5223 and hobby light signals, item 4021, 4022. The module offers 3 possible distant signal aspects (Vr0, Vr1 and Vr2). Authentic smooth switch of signal aspects. By masking the stop showing home signal fixed on the same mast the distant signal is switched off.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
5220 ( 802.04 kb )

Passende Artikel

H0 Hobby colour light block signal
4021 H0 Hobby colour light block signal
Signal in standard construction with filigree latticed brass mast, authentic varnishing, maintenance free, with electronics and automatic train control. With 2 LEDs, Signal pictures Hp0 and Hp1. Height: 8,6 cm.

€39.95*
available
Stk
H0 Hobby colour light entry signal
4022 H0 Hobby colour light entry signal
Signal in standard construction with filigree latticed brass mast, authentic varnishing, maintenance free, with electronics and automatic train control. With 3 LEDs, Signal pictures Hp0, Hp1 and Hp2. Height: 8,6 cm.

€57.50*
available
Stk

Customers also bought

Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*
Delivery time on request
Go to retailer search
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Without infrared reading functionality, it is comparable to the IR Traffic smart, item 8405. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions. Communication with IR Traffic smart, item 8405 enables autonomous charging control through traffic flow management. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 40 mm

€129.95*
Delivery time on request
Go to retailer search
H0 Gear unit with motor
8426 H0 Gear unit with motor
High-performance, low-wear motor for underfloor drive with encapsulated gear and one driven axle, suitable for CarMotion vehicles. The rear axle is non-driven and height-adjustable.Operating voltage: 7 – 12 V DCL 4 x W 2.8 x H 1.3 cm

€37.95*
Delivery time on request
Go to retailer search
H0 MB ACTROS 3-axle articulate truck, basic, functional model
8030 H0 MB ACTROS 3-axle articulate truck, basic, functional model
In 1996, Mercedes introduced the ACTROS series in different variants. This vehicle is equipped with an M cab. Like all models of the CarMotion series, it comes with the following functions:- Charging and programming connection- Short charging times due to modern lithium polymer batteries- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor- Free cargo area due to underfloor drive unit- Cabin lighting- Braking and reversing lights- Direction indicators right/left and warning lights controllable- Low beam / high beam light- Roof beacons (depending on type of vehicle)- Clear seethrough driver‘s cab with figure- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers- Compatible with existing systems with contact wire or magnetic tape- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402- Even without mechanical guidance a short straight line reverse is possible via steering by the remote controlL 8.2 x W 3.5 x H 3.7 cm

€199.95*
available
Stk
Plug-in rail for interior lighting on board, 12-pole
6049 Plug-in rail for interior lighting on board, 12-pole
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.

€8.95*
available
Stk
LED for floor interior lighting warm-white, 10 pieces
6046 LED for floor interior lighting warm-white, 10 pieces
Ideal for use with the floor interior lighting item 6045. The LEDs can be precisely glued into the racks for individual illuminating of entire floors or individual single windows in buildings of all kinds. Each one LED provides the right brightness. Also available as item 6047 yellow and item 6048 white LED. Same for light boxes of house illumination starter set item 6005.

€17.50*
available
Stk