5222 Control module for colour light entry signal

Useable for all 4-aspect colour light departure signals scale 0 to Z (except signals with multiplex-technology). The module provides all 4 block signal aspects (Hp0, Hp1, Hp2 and Sh1). Authentic smooth switch of signal aspects. Integrated contact for train control. By stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5545, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.

available

With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, items 4021, 4022, the signal control module item 5210 and control module for colour light entry signals item 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item 5210 as well as the control module for colour light signals item 5222. Operation in analogue mode with control module items 5224 and 5229 when 3-aspect signals are connected. For 3-rail turnouts use diode item 6834. Several panels may be connected. Contact rating: Up to 2 A.

available

The transformer provides model train accessories, e. g. lamps, signals and turnouts with required low voltage. Suitable for all kinds of model train systems. Integrated overload protection avoids overload and short-circuit breakdown by timeous cut-off of the transformer. Technical data: Input voltage 230 V - output voltage 10 and 16 V~, maximum power 52 VA. Dimensions: L 13 x W 7 x H 5 cm.

available

Useable for all 2-aspect colour light main signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal aspects Hp0 and Hp1. Authentic smooth switch of signal aspects. Integrated contact for train control. With stop showing signal the track in front of the signal is switched off. Control by universal push-button panel item 5547, single button, switching tracks, track contacts or digital magnet decoder. Additional output to control distant signal by control module item 5220.

available

The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

available

Useable in connection with control modules for colour light signals items 5221 – 5223 and hobby light signals, item 4021, 4022. The module offers 3 possible distant signal aspects (Vr0, Vr1 and Vr2). Authentic smooth switch of signal aspects. By masking the stop showing home signal fixed on the same mast the distant signal is switched off.

available