5236 Extension cable for multiplexer, 1m
€10.50*
Delivery time: 2-4 Werktage
Article no.: 5236
weee DE86057721
Login
Customers also bought
Content:
1 m
available
Article no.: 5236
weee DE86057721
Product information "Extension cable for multiplexer, 1m "
4-pole extension cable to connect multiplex colour light signals and the control module multiplexers items 5229 and 52292. Length: 1 m.
4011 H0 Colour light block signal
€19.50*
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.
available
6065 H0 Wood post lamp, LED warm-white
€18.95*
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 9 cm. Suitable for kibri stations, e. g. item 39507, 49517 or 39491, or Vollmer stations, e. g. item 43501, 43510, 43512 or 43524.
available
5550 Universal on-off switch
€23.95*
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
3560 LED warm-white with soldered cables, 5 pieces
€14.50*
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
available
4143 H0 Catenary wire 360 mm, 3 pieces
€13.50*
Ready-to-install catenary contact wire with eyehooks for easy clipping to support arms. The various lengths match the length of sectional track of the most popular model train suppliers. Ø 0,6 mm. Suitable for all track systems.
available
8402 Remote control
€16.50*
The remote control facilitates the control of the CarMotion vehicles on the layout as well as a simple configuration of the vehicle. For this purpose the remote control is directed towards the front part of the vehicle where its infrared sensors are located. Distances larger than 50 cm require a very precise alignment of the remote control with the vehicle. Under favourable conditions a distance of up to 1 m is possible. The device is designed for a local control of the vehicles – driving on sight, so to speak. It can be used to start a vehicle – even from an active stop coil – and to stop it at any time. Furthermore, it is possible to set the vehicle speed and other vehicle functions such as lighting, blinking lights etc. For these basic configurations, it is not necessary to connect the vehicle to the programming device. Moreover, the remote control complements the vehicle control via the magnet arrangement underneath the roadway – thus the user can carry out complex operations and has further options to intervene.
available