Skip to main content Skip to search Skip to main navigation
Menu

Description

Product information "Feedback decoder for s88-Bus"

Compatible with the s88. The feedback decoder can be used with the Märklin Interface, the Märklin Memory, Uhlenbrock Intellibox and Viessmann Commander. The 16 inputs of the module for track occupancy detection or for starting memory-switch sequences can be connected to the track contacts item 6840 or with Märklin K-and C-tracks directly to the contacts track section. Attached is a 15 cm length special cable and original s88 plugs. For 2 rail tracks the track occupancy detector item 5233 is recommended.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!



Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

Skip product gallery

Passende Artikel

Track occupancy detector, 8-sections
5206
Track occupancy detector, 8-sections

To control and support 8 track sections. The outputs can be mounted directly to insulated track sections and detect every consuming vehicle. Suitable for AC- and DC digital voltage. Feedback decoders e. g. item 5217, relays items 5207, 5551, 5552, points and signals with end sections, LEDs or lamps can be connected. Max. load is 3 A for the outputs and 4,5 A for the whole module. Track occupancy detector provides a special track supply, which provides feedback even if the current on the rails is interrupted (trafo reset to zero or after short circuit).

Regular price: €118.95

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk
Skip product gallery

Customers also bought

H0 Park lamp, LED warm-white, 5 + 1
60706
H0 Park lamp, LED warm-white, 5 + 1

Classic park lamp. Prototypical brass mast with base socket for easy mounting. Height: 5,6 cm. Economic set with 6 lights item 6070 for the price of 5.

Regular price: €63.95

available

Permanent magnet holder for test operation, 2 pieces Permanent magnet holder for test operation, 2 pieces
8437
Permanent magnet holder for test operation, 2 pieces

The permanent magnet holder is the ideal solution for testing the CarMotion system. Equipped with one or more magnets, the holder can be flexibly positioned to the right of the roadway. This allows you to precisely verify whether – and at which point – the CarMotion vehicle detects and executes defined control commands. Its sturdy design enables quick setup and easy repositioning during test runs, ensuring accurate results under realistic conditions.

Regular price: €6.50

available

Permanent magnets, 12 pieces
8431
Permanent magnets, 12 pieces

With a series of up to three magnets underneath the road stationary commands can be triggered, e. g. a speed variation or the switching of various light functions.Ø 0.4 x H 0.5 cm

Regular price: €8.50

available

H0 Standard mast, 10 pieces
4109
H0 Standard mast, 10 pieces

With beam, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,9 cm. Low priced pack with content of 10 pieces.

Regular price: €73.50

available

Plugs yellow, 10 pieces
6870
Plugs yellow, 10 pieces

Especially for a safe connection and current transmission.

Regular price: €4.95

available

H0 Wall lamp for goods shed, LED warm-white
6087
H0 Wall lamp for goods shed, LED warm-white

This basic wall lamp is ideal for storage buildings, sheds and depots for the epoch III. Maintenance free by LED lighting.

Regular price: €13.95

available