5231 H0 Decoder for C-track, 1-way
€42.50
Delivery time: 2-4 Werktage
Article no.: 5231
weee DE86057721
Product information "H0 Decoder for C-track, 1-way"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Customers also bought
Compact blinker unit, that can be integrated especially well into model buildings due to their small dimensions and provide a realistic fire flicker. The LEDs blink separately. Operation with only one LED is possible. Easy wiring due to wires already soldered to the LEDs. Dimensions Electronics: L 2,5 x W 0,4 x H 0,3 cm, LED: L 0,16 x W 0,08 cm.
available
Perfect house illumination for all kinds of buildings. 2 LEDs on one thin board to fasten under the roof, maintenance free. Suitable for house illumination starter set item 6005.
available
One piece Vollmer stone art street is attached. Length: 18 cm. The tunnel portal is made of Vollmer stone art. Dimensions: L 12 x W 7,6 x H 4,5 cm.
available
Using the Viessmann mast positioner is the easiest way to check the correct mast position and the distance between catenary wire to the track middle. For determining the correct mast position and checking the distance between catenary wire to the track middle. That ensures that the current consumer has always contact with the catenary wire.
available
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.
available
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.
available