Product added to compare
Product information "Digital brake module "
The digital brake module provides prototypical slow starts and stops in front of a stop signal. Operating with all locomotive decoders, which support the Märklin braking track (Viessmann locomotive decoders, a lot of Märklin locomotive decoders and even more manufacturers). Special technology provides easy connection and compatibility with bidirectional operation. When stopping at the signal the light in the vehicles remains switched on.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Customers also bought

5550 Universal on-off switch
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

€23.95*
available
Stk
6047 LED for floor interior lighting yellow, 10 pieces
Ideal for use with the floor interior lighting item 6045. The LEDs can be precisely glued into the racks for individual illuminating of entire floors or individual single windows in buildings of all kinds. Each one LED provides the right brightness. Also available as item 6047 yellow and item 6048 white LED. Same for light boxes of house illumination starter set item 6005.

€17.50*
available
Stk
6065 H0 Wood post lamp, LED warm-white
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 9 cm. Suitable for kibri stations, e. g. item 39507, 49517 or 39491, or Vollmer stations, e. g. item 43501, 43510, 43512 or 43524.

€18.95*
available
Stk
5547 Push-button panel 2-aspect
With impulse contact for 4 turnouts resp. for 2-aspect semaphore signals or up to 8 uncoupling tracks. Especially suitable for the hobby colour light block signal item 4021, signal module item 5210, electronic relay item 5552 as well as control module for light block signals item 5221. In analogue mode controls the panel the control module for light signals items 5224, 5229 and 52292 when 2-aspect signals are connected. Several panels may be connected. Contact rating: Up to 2 A.

€26.95*
available
Stk
6049 Plug-in rail for interior lighting on board, 12-pole
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.

€8.95*
available
Stk
4160 H0 Suspended box girders covering 2 tracks
Equipped with tower mast, ready-to-install and varnished. With 2 electrically insulated beams. The beam components are variably adjustable. With rear side cut-out to accommodate more beams. Filigree metal work with stamped rivet imitations. Maximum span width: 11,75 cm, height: 15,09 cm.

€39.95*
available
Stk