5234 Extension module for track occupancy detector **discontinued**

Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.

available

The background settings for maximum optical enlargement of your layout.

available

To equip thin wires and litz wires to make them pluggable, e. g. in connection with Viessmann plug-in rail item 6049 or the power module with plug-in rail item 5205. By using adapter pins even very thin wires without resistors and diodes can be plugged in. The wires are injected in the adapter pin without soldering.

available

Weight for CarMotion MB Actros vehicles with M cab. Retrofitting ahead of the front axle. The weight increases the front axle’s downforce on the road, enabling the maneuvering of trailers through tighter radii.

available

The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.

available

Allows an automatical stop in station area with soft stop and start movement. Even stopover by shuttle service control module items 5214 and 5204 is possible – one stopover is sufficient for various breakpoints! Push-pull operation is possible. Integrated track occupancy detectors make track- or signal contacts dispensable, works in both directions. Integrated light signal control for both directions with prototypical smooth change of light. The stop time, starting acceleration and braking time are separately adjustable. Useable with AC, DC and digital operation.

available