5227 Relay, monostable, 2 x 2UM, negative switching signal
€36.95
Delivery time: 2-4 Werktage
Article no.: 5227
weee DE86057721
Product information "Relay, monostable, 2 x 2UM, negative switching signal"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
Control module with integrated digital decoder (MM/ DCC) is for 2 Viessmann home signals with multiplex-technology, e. g. Ks-signals items 4042 – 4046 and standard light signals items 4721 – 4728 and is the best control for Viessmann signal bridge item 4750 equipped with signal heads items 4750 – 4753. The module controls 2 independent home signals and automatically identifies the connected signals. In case that home- and distant signal are one unit (Hp/Vr- combination), the signal heads can be controlled separately with an own address. Block distances operation with track control. Viessmann SpeedBus (LSB) provides comfortable connection with Viessmann Commander. Connected signal is recognized and configurated accordingly. Module has no Signalbus but offers control of distant signal by free addresses. The module recognizes the task of home signal and controls the distant signal. Connection of the signal is done by only one track connection. Smooth change of lighting between the signal pictures and more features are adjustable. For automatic train control item 5227 relay, double, monostable, 2 x 2UM direct connection is possible.
available
Customers also bought
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.
Content: 5 m (€3.70 / 1 m)
available
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.L 500 x W 0.3 x H 0.05 cm
Content: 5 m (€2.99 / 1 m)
available
With impulse contact for two 3-aspect semaphore signals and also for hobby entry signals, items 4021, 4022, the signal control module item 5210 and control module for colour light entry signals item 5222. For activating the signal aspects stop, proceed, proceed at reduced speed and stop for shunting movements by control module item 5210 as well as the control module for colour light signals item 5222. Operation in analogue mode with control module items 5224 and 5229 when 3-aspect signals are connected. For 3-rail turnouts use diode item 6834. Several panels may be connected. Contact rating: Up to 2 A.
available
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.
available
The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm
available