5551 Universal relay 1 x 4UM
€34.95
Delivery time: 2-4 Werktage
Article no.: 5551
weee DE86057721
Product information "Universal relay 1 x 4UM"
The relay converts impulses, sent by digital decoders, push-button panels, switching tracks or track contacts into continuous current. To switch lamps, signals, etc. and block signal logic. End position switchable by impulse or continuous signal. Feedback is provided in connection with the universal push-button panel, item 5549. Attached coupling lever. Current consumption: 400 mA. Contact load each changeover contact max. 1,5 A.
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
To control and support 8 track sections. The outputs can be mounted directly to insulated track sections and detect every consuming vehicle. Suitable for AC- and DC digital voltage. Feedback decoders e. g. item 5217, relays items 5207, 5551, 5552, points and signals with end sections, LEDs or lamps can be connected. Max. load is 3 A for the outputs and 4,5 A for the whole module. Track occupancy detector provides a special track supply, which provides feedback even if the current on the rails is interrupted (trafo reset to zero or after short circuit).
available
Feedback compatible push-button panel with impulse-contact for four semaphore signals with 2 aspects, tracks or universal relay, item 5551. Authentic feedback of the signals, tracks or relays by 8 red and green LEDs. Several panels can be stringed together. Only useable for signals with automatic deactivation via mechanical contacts. Contact load: 2 A.
available
Customers also bought
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.
available
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.
available
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.
available
Ideal for use with the floor interior lighting item 6045. The LEDs can be precisely glued into the racks for individual illuminating of entire floors or individual single windows in buildings of all kinds. Each one LED provides the right brightness. Also available as item 6047 yellow and item 6048 white LED. Same for light boxes of house illumination starter set item 6005.
available