5552 Electronic relay 2 x 2UM

To control and support 8 track sections. The outputs can be mounted directly to insulated track sections and detect every consuming vehicle. Suitable for AC- and DC digital voltage. Feedback decoders e. g. item 5217, relays items 5207, 5551, 5552, points and signals with end sections, LEDs or lamps can be connected. Max. load is 3 A for the outputs and 4,5 A for the whole module. Track occupancy detector provides a special track supply, which provides feedback even if the current on the rails is interrupted (trafo reset to zero or after short circuit).

available

Level crossing with 2 barriers, powered by 2 separate underfloor drive units. Slow movement during opening and closing of the barriers. Track filling pieces, ramps and printed traffic signs are attached. Upgradable with extension set item 5103. For automatic use additional switching-tracks resp. reed contacts item 6840 are required. For double tracks even an electronic relay item 5552 is required. More connectors are available with items 5101 (2 rail version) and 5102 (3 rail version). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: item 5556. Length of barrier arms: ca. 4,3 cm.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp1. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp2. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available