39720 H0 Hölltobel-viaduct, single track
€63.95
Delivery time: 2-4 Werktage
Article no.: 39720
Product information "H0 Hölltobel-viaduct, single track"
L 60.2 x W 7.0 x H 13.2 cm / Road height 12.0 cm
Passage height 9.5 cm / Passage width 25.5 cm
Level of difficulty: 2 (advanced)
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Customers also bought
Kit. With connection system.L 24.0 x W 39.0 x H 15.0 cm / Angle of tracks 15°Level of difficulty: 2 (advanced)
available
Kit. Set consists of 3 different fences.Total length 360 x W 0.1 x H 0.6 cmLevel of difficulty: 1 (beginners)
Content: 3.6 m (€4.86 / 1 m)
available
Kit. Bus stop L 6.0 x W 3.3 x H 3.2 cmAdvertising column Ø 1.4 x H 3.7 cmLevel of difficulty: 1 (beginners)
available
High-grade litz wire for low-loss current feed and signal transmission.
Content: 25 m (€0.36 / 1 m)
available
The welder kneels and performs his work in appropriate protective clothing. With realistic welding light by micro-LED offers authentic effect. Mounting depth: 38 mm. Perfectly matching hydraulic lift item 5131 and kibri item 38541 ARAL fuel station.
available
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm
available