39252 H0 Maintenance hangar GleisBau, modern

The welder kneels and performs his work in appropriate protective clothing. With realistic welding light by micro-LED offers authentic effect. Mounting depth: 38 mm. Perfectly matching hydraulic lift item 5131 and kibri item 38541 ARAL fuel station.

available

This newly developed ballast renewal machine from Plasser & Theurer is equipped with two drive options – electric and diesel-electric (hybrid) – bymeans of a 600 kW diesel engine. Driving engines and hydraulics are always driven electrically. The electric drive allows for a low-maintenance, as wellas silent and low-emission operation (CO2-reduced).The trendsetting design is mainly function-orientated and keyed to enhance work safety. The model is to a high degree a copy of the prototype in termsof both function and design.Innovation by Viessmann:Operation optional in drive mode or working mode travelling forward at ca. 1 km/h with tamping unit moving vertically and horizontally. Pantograph motor-driven, several light functions. Digital decoder with original sound for electric resp. diesel engine for DCC, MM and analogue mode DC, compatiblewith RailCom. Excellently synchronized tamping unit with the drive motors and the sound. Premium two-part model with zinc diecasting chassis and twosynchronized drive motors ensuring a dynamic yet sensitive train operation, supported by integral current memories.With coupler pockets acc. NEM 362 and attached system coupling.Dimensions: Lob 39,3 x W 3,9 x H (without/with pantograph) 5,1/7,6 cm.Weight: 650 gFunctions in analogue mode:- Driving mode forward / reverse- Switchable functions: Working mode with fully functional tamping unit, synchronized with the drive motors and the sound, incl. warning light and working lights- Sound active- Light active (configurable by CVs)Functions in digital mode:- Driving mode forward/reverse- Switchable functions: Working mode with fully functional tamping unit, synchronized with the drive motors and the sound (slide movement forward and backward, tamping movement, also all individually switchable)- Sound, horn- Pantograph up/down- Shunting modeSwitchable light functions in digital mode:- Coach lighting white or blue- Headlights switchable individually acc. to direction of travel as well white/red, high and low beam switchable- Stoplight- High beam- Operator’s cab lighting- Work space lighting- Warning light front and back

available

Kit. Extension set for individual extension of maintenance hangar GleisBau, item 39252 (each field ca. 7 cm). Content: Each 2 elements for both sides, roof parts, rail sections, pit. Suitable for 2 and 3 rail systems.Wall element L 14 x W 14,3 x H 12,5 cmLevel of difficulty: 1 (beginner)

available

Kit. Complementary kit for warehouse / industrial hall, item 39250, maintenance hangar GleisBau, item 39252 and Truck repair hall, item 39254. L 6.3 x W 6.3 x H 7.5 cmLevel of difficulty: 1 (beginner)

available

Kit. With shelves. Fits perfectly to warehouse / industrial hall, item 39250.L 6.8 x W 1.3 x H 7 cmLevel of difficulty: 1 (beginner)

available

These LED light strips are suitable for stationary lighting. They consist of flexible material and are coated on their backs with adhesive tape. Thus they can easily be mounted even in bent condition. The LED strips are intended to be used with power modules 5215, 5225 or 5205 or with DC voltages of 18V or higher. The enclosed resistors allow for brightness adjustment.The max. contact load per segment is 25 mA, the load for the total strip must not exceed 190 mA. Operating voltage with serial resistor: 24V =. Incl. connection cable. The light strip equipped with 55 LEDs consists of 11 separable segments and has a total length of approx. 175 mm. Each segment is approx. 15.4 mm long and has 5 warm-white LEDs (2200K). The segments are connected in parallel.

available

These LED light strips are suitable for stationary lighting. They consist of flexible material and are coated on their backs with adhesive tape. Thus they can easily be mounted even in bent condition. The LED strips are intended to be used with power modules 5215, 5225 or 5205 or with DC voltages of 18V or higher. The enclosed resistors allow for brightness adjustment.The max. contact load per segment is 25 mA, the load for the total strip must not exceed 190 mA. Operating voltage with serial resistor: 24V =. Incl. connection cable. The light strip equipped with 66 LEDs consists of 11 separable segments and has a total length of approx. 175 mm. Each segment is approx. 15.4 mm long and has 6 white LEDs (4000K). The segments are connected in parallel.

available

Maintenance free by LED lighting. To illuminate buildings, valuable monuments, advertising boards, mounting on funfair models or as stage projector. All spots are movable up-, down- and backwards. Spot box: L 0,55 x W 0,45 cm. Height: ca. 1,7 cm.

available