39253 H0 Extension set for Maintenance hangar GleisBau 39252
€70.95
Delivery time: 2-4 Werktage
Article no.: 39253
This product offers other products in a discounted bundle! Benefit from the curated combinations and discounts!
Product information "H0 Extension set for Maintenance hangar GleisBau 39252"
Wall element L 14 x W 14,3 x H 12,5 cm
Level of difficulty: 1 (beginner)
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
This newly developed ballast renewal machine from Plasser & Theurer is equipped with two drive options – electric and diesel-electric (hybrid) – bymeans of a 600 kW diesel engine. Driving engines and hydraulics are always driven electrically. The electric drive allows for a low-maintenance, as wellas silent and low-emission operation (CO2-reduced).The trendsetting design is mainly function-orientated and keyed to enhance work safety. The model is to a high degree a copy of the prototype in termsof both function and design.Innovation by Viessmann:Operation optional in drive mode or working mode travelling forward at ca. 1 km/h with tamping unit moving vertically and horizontally. Pantograph motor-driven, several light functions. Digital decoder with original sound for electric resp. diesel engine for DCC, MM and analogue mode DC, compatiblewith RailCom. Excellently synchronized tamping unit with the drive motors and the sound. Premium two-part model with zinc diecasting chassis and twosynchronized drive motors ensuring a dynamic yet sensitive train operation, supported by integral current memories.With coupler pockets acc. NEM 362 and attached system coupling.Dimensions: Lob 39,3 x W 3,9 x H (without/with pantograph) 5,1/7,6 cm.Weight: 650 gFunctions in analogue mode:- Driving mode forward / reverse- Switchable functions: Working mode with fully functional tamping unit, synchronized with the drive motors and the sound, incl. warning light and working lights- Sound active- Light active (configurable by CVs)Functions in digital mode:- Driving mode forward/reverse- Switchable functions: Working mode with fully functional tamping unit, synchronized with the drive motors and the sound (slide movement forward and backward, tamping movement, also all individually switchable)- Sound, horn- Pantograph up/down- Shunting modeSwitchable light functions in digital mode:- Coach lighting white or blue- Headlights switchable individually acc. to direction of travel as well white/red, high and low beam switchable- Stoplight- High beam- Operator’s cab lighting- Work space lighting- Warning light front and back
available
Kit. With an end-to-end maintenance and repair pit. Continuously accessible for 2 or 3 rail vehicles. Rail sections are included in delivery. The 2 roller shutters are prepared for the Viessmann motorized roller shutter item 5172, they are pre-assembled and can be rolled up manually. The roof is removable. The hall can be extended as desired with extension set, item 39253. With base L 34.9 x W 14.3 x H 12.5 cmMounting depth 1.4 cmTrack middle distance 6.9 cmLevel of difficulty: 2 (advanced)
available
Kit. With shelves. Fits perfectly to warehouse / industrial hall, item 39250.L 6.8 x W 1.3 x H 7 cmLevel of difficulty: 1 (beginner)
available
Kit. Complementary kit for warehouse / industrial hall, item 39250, maintenance hangar GleisBau, item 39252 and Truck repair hall, item 39254. L 6.3 x W 6.3 x H 7.5 cmLevel of difficulty: 1 (beginner)
available
Maintenance free by LED lighting. To illuminate buildings, valuable monuments, advertising boards, mounting on funfair models or as stage projector. All spots are movable up-, down- and backwards. Spot box: L 0,55 x W 0,45 cm. Height: ca. 1,7 cm.
available
Customers also bought
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm
available
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Height: 7 cm. Favourable set with 6 lamps item 6364 for the price of 5.
available
Finished model. Low side car equipped with 2 supply containers from GleisBau series. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft.Lob 15.8 x W 3.5 x H 4.8 cm
available
The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm
available
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm
available
Kit. With an end-to-end maintenance and repair pit. Continuously accessible for 2 or 3 rail vehicles. Rail sections are included in delivery. The 2 roller shutters are prepared for the Viessmann motorized roller shutter item 5172, they are pre-assembled and can be rolled up manually. The roof is removable. The hall can be extended as desired with extension set, item 39253. With base L 34.9 x W 14.3 x H 12.5 cmMounting depth 1.4 cmTrack middle distance 6.9 cmLevel of difficulty: 2 (advanced)
available