43522 H0 Station Burghausen

The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

available

Kit. L 39.5 x W 17.5 x H 19.5 cmPassage height 7.5 cm / Passage width 5.5 cmLevel of difficulty: 2 (advanced)

available

This shed has a covered railway siding. So goods are loaded and unloaded dry. The wood- and brick-construction offers an interesting structure. Glass block elements let the light pass through to the inside space. Passage height: 7 cm. Passage width: 5 cm. Dimensions: L 26 x W 16 x H 11 cm.

available

The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.L 500 x W 0.3 x H 0.05 cm

available

Kit. L 8.9 x W 2.0 x H 8.3 cmLevel of difficulty: 2 (advanced)

available

Dimensions: L 62 x W 4.8 – 5.2 x H 7.2 cm / Platform height 1.2 cm

currently not available