Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 MB Round bonnet 3-axle with long log truck, basic, functional model
H0 MB Round bonnet 3-axle with long log truck, basic, functional model
H0 MB Round bonnet 3-axle with long log truck, basic, functional model
H0 MB Round bonnet 3-axle with long log truck, basic, functional model

8036 H0 MB Round bonnet 3-axle with long log truck, basic, functional model

€299.95*

Prices incl. VAT plus shipping costs

Create review

scheduled delivery: 3. Quartal 2025

currently not available

Go to retailer search
Go to retailer search
Article no.: 8036

weee DE86057721

Product information "H0 MB Round bonnet 3-axle with long log truck, basic, functional model"

Like all models of the CarMotion series, the vehicle comes with the following functions:
- Charging and programming connection
- Short charging times due to modern lithium polymer batteries
- With a full battery and normal operation with waiting times and various speeds a runtime of approx. 4 – 6 hours, and approx. 2 hours at max. speed/full load is possible.
- Easy on/off switching via a reed contact under the cab‘s roof with magnetic pointing stick or telescopic magnetic bar, item 8410
- Infrared transmitter/receiver for distance control (limited compatibility with other IR systems)
- Realistic braking resp. accelerating action and configurable speed due to speed-controlled motor
- Free cargo area due to underfloor drive unit
- Cabin lighting
- Braking and reversing lights
- Direction indicators right/left and warning lights controllable
- Low beam / high beam light
- Roof beacons (depending on type of vehicle)
- Clear seethrough driver‘s cab with figure
- 5-pole plug-in coupling for the connection of CarMotion trailers or semitrailers
- Compatible with existing systems with contact wire or magnetic tape
- Control by infrared light (IR), permanent magnets item 8431 in the road, electromagnetic stop coils and remote control item 8402
- Even without mechanical guidance a short straight line reverse is possible via steering by the remote control
Prototype data: MERCEDES BENZ LAK 2624, 177 kW/240 HP Diesel motor.
Suitable retrofit kit Sound: item 8454
L 18 x W 3.3 x H 3.3 – 5.2 cm

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
8036 ( 3,873.03 kb )

Passende Artikel

H0 Retrofit kit Sound for MB round bonnets, red brown
8454 H0 Retrofit kit Sound for MB round bonnets, red brown
Enhance your CarMotion layout with in-vehicle sound effects. The retrofittable sound modules are vehicle-specific, ensuring they are mechanically, visually, and acoustically tailored to each model. These modules reproduce engine sounds for starting and stopping, as well as various driving-related sounds, such as gear changes, brake squeals, and depending on the vehicle type, even reverse warning signals. The horn, and if equipped, a siren, can also be activated. The engine sound volume is adjustable. The selectable and adjustable sounds can be controlled via remote control, DCC command, infrared command, or magnetic sequence. The circuit board of the sound module is easily connected to the vehicle‘s circuit board using a four-pin connector and secured with screws. The previous left-side components, such as the exhaust and air tanks, are replaced with the new components that house the speaker. Please note that vehicles without the four-pin expansion socket cannot be equipped with a sound module.Output power 250 mW, efficiency 81 dBA, frequency range approx. 800 – 10 kHz.Suitable items: 8003, 8016, 8020, 8036, 8155.L 22.5 x W 11.2 x H 9.3 mm

€49.95*

currently not available

Go to retailer search

Customers also bought

InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Stk
Magnetic tape 0.5 mm, 5 m
8429 Magnetic tape 0.5 mm, 5 m
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.L 500 x W 0.3 x H 0.05 cm

Content: 5 m (€2.79* / 1 m)

€13.95*

available

Stk
H0 VW Beetle Type 11, 1302, basic, functional model
8090 H0 VW Beetle Type 11, 1302, basic, functional model
Prototype: The VW Beetle Type 11, Version 1302, was manufactured from 1970 to 1972. Equipped with a 1600cc four-cylinder boxer engine, it boasted 50 HP. This model introduced a more modern front axle with MacPherson struts and an independent rear suspension with trailing arms. In 1972, the Beetle surpassed the Ford Model T as the world’s most produced car. Model: The CarMotion variant of this series is prepared for the InduktivCharger, item 8408 and features an integrated receiver coil for wireless charging. Approximately 45 – 60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed.It offers: • Charging and programming socket • Fast charging times facilitated by advanced Li-Po batteries • Approximately 45-60 minutes of runtime under normal driving conditions, up to 30 minutes at maximum speed • Easy on/off operation with a reed contact located under the roof • Infrared transmitter/receiver for distance control • Realistic braking and acceleration manoeuvres • Interior lighting, brake lights, turn signals, low/high beams • Visible interior with a driver figure • Compatibility with guide wire, magnetic tape, and infrared control • Inductive charging without the need for additional track aids.L 4.8 x W 1.9 x H 1.7 cm

€249.95*

currently not available

Go to retailer search
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

available

Stk
Programming device for passenger cars
8413 Programming device for passenger cars
Functionally equivalent to the programming device for trucks and buses, item 8401, but equipped with a smaller connector designed for passenger vehicles, such as the Beetle, item 8090.

€25.95*

currently not available

Go to retailer search
Programming device for trucks and buses
8401 Programming device for trucks and buses
With the programming device you can make various settings as well as software updates on your CarMotion trucks and buses. With an USB cable it is connected to the charging socket of the vehicle and to the USB-A socket of a computer or a hub, adapter or other. The user-friendly operating software communicates with the vehicle, provides information about the charging status, the distance travelled etc. Furthermore, it enables comfortable setting of various vehicle parameters such as speed, active functions, light brightness and many more. In particular, it is used for setting the desired reactions of the vehicles to the commands that can be triggered by the magnet arrangement in the roadway. Moreover, it is easy to copy configurations between vehicles.

€25.95*

available

Stk