48289 H0 Stationary loading and unloading ramp for Märklin heavy-duty trucks
€25.95
Delivery time: 2-4 Werktage
Article no.: 48289
Description
Product information "H0 Stationary loading and unloading ramp for Märklin heavy-duty trucks"
The stationary loading and unloading ramp for heavy-duty trucks (Märklin 48740), also known as a rolling highway, is a permanently installed ramp solution specifically designed for the safe loading and unloading of CarMotion vehicles.
This ramp provides a stable and durable means of moving CarMotion vehicles onto and off heavy transporters, ensuring smooth and reliable logistics during transportation operations.
A road surface made of Vollmer Stone Art asphalt is included with the ramp, offering maximum durability and slip resistance.
Available as a white model for self-painting.
Dimensions: L 7 x W 6.4 x H 2.9 cm
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.
Content: 5 m (€3.59 / 1 m)
available
With a series of up to three magnets underneath the road stationary commands can be triggered, e. g. a speed variation or the switching of various light functions.Ø 0.4 x H 0.5 cm
currently not available
Customers also bought
Turnout similar to item 8448, equipped with lateral actuation mechanisms (left, right) for manual operation. Ideal for systems controlled solely through our CarMotion remote control, item 8402, and permanent magnets, item 8431 (without wiring).
currently not available
This turnout is equipped with a powerful and low-noise drive featuring secure positioning achieved by a robust 10 mm motor with planetary gear. By rearranging the variable end stops, a left, right, or 3-way diversion can be selectively created. The electronics are housed compactly within the casing. The diverter can be controlled manually, via buttons/switches or our InduktivCharger, item 8408, enabling digital control capabilities. Like the vehicles, the turnout can be comfortably configured in the CarManager.
currently not available
The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine. Dimensions: L 500 x W 0.3 x H 0.1 cm.
Content: 5 m (€3.59 / 1 m)
available
The IR Scanner is a locally deployed sensor unit designed to detect vehicle-specific information at defined points along the route. While vehicles are in motion, it captures relevant data in real time and makes this information immediately available to the traffic infrastructure. This enables situation-dependent control of routes, access points, and special zones – precise, automated, and efficient. Continuous data acquisition allows traffic flows to be differentiated in a targeted manner. For example, short vehicles can be preferentially guided into inner-city areas, while long vehicles or vehicle-trailer combinations are automatically routed along alternative paths. Access can also be selectively granted to specific vehicle types, such as allowing buses to enter designated stop areas while other traffic is diverted. Vehicles with a low battery charge can be directed to inductive charging zones, while vehicles with sufficient remaining charge continue without impacting traffic flow. The result is more efficient use of infrastructure while simultaneously relieving sensitive traffic areas.
currently not available
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.
available
Front axle fully assembled with steering arm and magnet for CarMotion trucks.This front axle is suitable for vehicles with a distance of 45–55 mm from the front axle to the drive axle.Suitable vehicles: 8115, 8152, 8161, 8130, 8131, 8132, 8133, 8135L 2.2 x W 2.8 x H 1.3 cm
currently not available