4101 H0 Catenary Set ICE
€314.95
Delivery time: 2-4 Werktage
Article no.: 4101
weee DE86057721
Description
Product information "H0 Catenary Set ICE"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
The power mast offers a separated application of the upper contact wire admission by which the different power supplies can be assigned. Thus single sections can be switched currentless and fundamental frequency clocking is possible. With beam and connection wire, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,9 cm.
available
For best electrical conductivity when operating a functional catenary.
available
Contents: Fuse holder, 2 fuses T 3, 15 A. Required for operation of a functional (current-carrying) catenary. For each transformer one fuse is sufficient.
available
Checking the correct position of catenary wire.
available
Using the Viessmann mast positioner is the easiest way to check the correct mast position and the distance between catenary wire and the track middle. Additonal contact wire positioning device offers to control differences of the catenary wire to the track middle. That ensures current consumer has contact with the catenary wire.
available
The fourth edition of the catenary book, German version, offers a lot of information about the subject catenary. On more than 130 pages you get information about the history and support ideas to assemble prototypically.
available
Customers also bought
Using the Viessmann mast positioner is the easiest way to check the correct mast position and the distance between catenary wire and the track middle. Additonal contact wire positioning device offers to control differences of the catenary wire to the track middle. That ensures current consumer has contact with the catenary wire.
available
With beam. Filigree metal work with stamped rivet imitations. Mast height: 11,5 cm.
available
Catenary system for one oval track (112 cm x 76 cm), consisting of 14 masts item 4110, 12 catenary wires 19 cm of item 4142, 2 catenary wires 36 cm of item 4143 and one height marker item 4196. To use the catenary system as a power supply, the following additional items are required: Power mast item 4111, fuse holder item 4188 with fuses, and Y-wires item 4170, which ensure a reliable connection between the wires.
available
Outside diameter: 0,22 cm, inside diameter: 0,06 cm, length: 0,38 cm.
available
These couplers allow you to provide an easy power supply system for the entire train. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362 coupling shaft. The couplers are contact-proof and cannot be uncoupled automatically, yet easy to separate and to couple. The thin cables (0.6 mm) allow a very easy mounting. Current consumption: max. 750 mA.Contents: 3 pairs with 3 adapters each (S: norm, M: +0.3 mm and L: +0.6 mm).
available
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.
available