15700 H0 Construction site units

These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm

Join us for an exciting journey and gladly discover more of our new and well-established products as well as useful recommendations and hints. No matter what gauge or epoch, we are convinced that you will find the appropriate accessories for your model train layout. On more than 270 pages, this catalogue contains many nice products but also lots of recommendations and ideas for your future projects. Cooperating with our customers and maintaining an intensive dialogue is our motivation to continue developing more and always more attractive products.

Kit. For the embarkation of bulk cargo of all types, like mineral ores, coals, grit, sand or grain, the portal crane is used in docks. As so-called covercrane, it is used everywhere in sea- or inland ports, where this type of goods have to be reloaded. Crane L 12.0 x W 10.0 x H 25.5 – 29.0 cmGround plate L 20.0 x W 12.0 cmLevel of difficulty: 2 (advanced)

Kit. With connection system. Manufactured in two-colour injection moulding process.L 13.0 x W 17.5 x H 18.5 cmLevel of difficulty: 2 (advanced)

Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.