38674 H0 Box column drill
€24.95
Delivery time: 2-4 Werktage
Article no.: 38674
Product information "H0 Box column drill"
L 1.3 x W 0.8 x H 2.3 cm
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
Kit. This warehouse of the epochs V - VI can be constructed individually due to the modular construction according to available space, by reducing e. g. one field (each field is approx. 7 cm). The hall is expandable with item 39251 (approx. 7 cm per field). L 28.0 x W 14.2 x H 10.0 cmLevel of difficulty: 2 (advanced)
available
Customers also bought
Finished model. These detailed machines fit perfectly to workshops of industrial buildings from kibri. Operational immediately, no assembly necessary.L 1.4 x W 1.7 x H 2.1 cm
available
Finished model. These detailed machines fit perfectly to workshops of industrial buildings from kibri. Operational immediately, no assembly necessary.L 2.3 x W 0.8 x H 1.4 cm
available
Finished model. These detailed machines fit perfectly to workshops of industrial buildings from kibri. Operational immediately, no assembly necessary.L 1.9 x W 1.4 x H 1.8 cm
available
Finished model. This detailed workbench fit perfectly to workshops of industrial buildings from kibri. Operational immediately, no assembly necessary.L 1.3 x W 2.3 x H 1.5 cm
available
The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm
available
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available