Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 Advertising board with LED lighting

6336 H0 Advertising board with LED lighting

€21.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 6336

weee DE86057721

Product information "H0 Advertising board with LED lighting"

Big sized advertising board, e. g. for mounting at bus stops, train stations, roadsides. Posters are exchangeable. Maintenance free by LED lighting.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
6336 ( 512.51 kb )

Passende Artikel

H0 Platform hall Bonn H0 Platform hall Bonn
39565 H0 Platform hall Bonn
Kit. This huge platform hall fits wonderfully to the model of the great railway station Bonn, item 39373. Impressing is the very interesting steel construction with big glass surfaces and many small details.The hall can be extended by other kits. It is suited as a transit station as well as a terminal station. For model rails and Märklin C-track. ICE heightening attached. L 44.0 x W 22.3 x H 13.5 cmPassage height 5.5/11.3 cm / Passage width 11.5 cmLevel of difficulty: 2 (advanced)

€82.95*

available

Stk
H0 Poster sticker on a ladder, moving **discontinued**
1517 H0 Poster sticker on a ladder, moving **discontinued**
Effective print! Advertising as an eye-catcher on your layout. Especially when the poster sticker is just decorating! The ideal addition to the advertising board item 6336. With underfloor drive unit. Mounting depth: 39 mm.

€48.95*

available

Stk

Customers also bought

Transformer 16 V, 52 VA
5200 Transformer 16 V, 52 VA
The transformer provides model train accessories, e. g. lamps, signals and turnouts with required low voltage. Suitable for all kinds of model train systems. Integrated overload protection avoids overload and short-circuit breakdown by timeous cut-off of the transformer. Technical data: Input voltage 230 V - output voltage 10 and 16 V~, maximum power 52 VA. Dimensions: L 13 x W 7 x H 5 cm.

€99.95*

available

Stk
LED for floor interior lighting warm-white, 10 pieces
6046 LED for floor interior lighting warm-white, 10 pieces
Ideal for use with the floor interior lighting item 6045. The LEDs can be precisely glued into the racks for individual illuminating of entire floors or individual single windows in buildings of all kinds. Each one LED provides the right brightness. Also available as item 6047 yellow and item 6048 white LED. Same for light boxes of house illumination starter set item 6005.

€17.95*

available

Stk
H0 Colour light block signal
4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.95*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€10.50*

available

Stk
Electronic relay 2 x 2UM
5552 Electronic relay 2 x 2UM
2 separate bistable relays, each with 2 contacts. The relays have no time limits but can be used with continuous current. To control colour light signals and semaphore signals, barriers, block- and train change automatic and so on. Control by positive switching impulses resp. by continuous current or AC. Power consumption: 2 x 14 mA. Maximum load for each contact: 2 A.

€38.95*

available

Stk
H0 Conducting couplers, 2-pole, 1 pair
5048 H0 Conducting couplers, 2-pole, 1 pair
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

€19.95*

available

Stk