6012 H0 Swan neck gas lamp green, LED warm-white
€16.95
Delivery time: 2-4 Werktage
Article no.: 6012
weee DE86057721
Description
Product information "H0 Swan neck gas lamp green, LED warm-white"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
The ideal solution for stable and powerful switching current as well as bright and flicker-free LED-lighting. To increase the switching power of digital decoders with separate voltage feed. For connection to the decoders items 5211, 5231 and 5280. Suitable for all decoders even from other producers in case an external power supply input is offered. One power module is able to supply up to 100 LED lights and several digital signals and decoders. Power rating: 2A.
available
Electronics for prototypical control of all Viessmann gas lamps in all scales. Suitable for LED lights, too. After switch-on by using push-button panel the lamps start to flicker like the prototype and slowly increase in brightness. After approx. 5 seconds the lamps will reach full brightness. During operation the lamps flicker occasionally (simulates variations of the gas pressure). Switched off, the lamps will continue to glow with reduced brightness and fully extinguish after approx. 1,5 seconds. 5 separate outputs with different ignition patterns. Each output can drive up to 3 gas lamps. We recommend to connect only one lamp per output as in reality no 2 lamps operate exactly the same way. Switching on / off is facilitated via a separate momentary action switch, e. g. push-button panel item 5547.
currently not available
Customers also bought
Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. With ignition switch item 5066 you can prototypically simulate the lighting of the gas lamp. Height: 5,6 cm.
available
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.
available
This basic wall lamp is ideal for storage buildings, sheds and depots for the epoch III. Maintenance free by LED lighting.
available
To equip thin wires and litz wires to make them pluggable, e. g. in connection with Viessmann plug-in rail item 6049 or the power module with plug-in rail item 5205. By using adapter pins even very thin wires without resistors and diodes can be plugged in. The wires are injected in the adapter pin without soldering.
available
Cleaning head is suitable for H0, TT and N gauge. Head can be mounted on different positions at the grip. Practical help especially for catenary layouts. Incl. replacement felt.
available
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available