2320 H0 Train rear lighting modern, 2 pieces for low side car

Set consists of 4 St. Andrew`s crosses and one blinker electronics item 5065. Maintenance free by LED lighting. For automatic operation the electronic relay item 5552 and switching tracks resp. the reed contact item 6840 are required. Height: 3,6 cm.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp1. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available

The bullock is expertly grilled on a rotating spit by the master barbecue chef himself. The grill can be used in a variety of ways on the layout. Mounting depth: 39 mm.

available

Signal in standard construction with filigree latticed brass mast. Maintenance free LED lighting. Very easy and safe connection via only one plug socket. Required multiplexer item 5229 or 52292 for analogue (limited) and ­digital model train layouts. With base socket for easy installation and connection. With plug and each 2 red and white LEDs, maintenance free. Signal aspects Sh0 and Sh1. Height: 0,7 cm.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp2. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available

Reed contact for triggering switch processes by the moving train. For mounting directly into the track. Useable for both 2 rail tracks and rail between traction rails. The switch contact operates contactlessly by train magnets, e. g. item 6841. Load up to 2 A. Length: 3,8 cm.

available