4500 H0 Semaphore home signal, single-arm

With filigree latticed brass mast and authentic varnishing, printed signal arms and underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal pictures Hp0 and Hp2. Height: 103 mm.

available

4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

available

Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

few available

Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.

available

12 light boxes - each 3 pieces in 4 different sizes and one house lighting LED white. The light boxes provide completely new clear lighting of each single room. For lighting we recommend our LEDs with connection cable in yellow item 6047, white item 6048 and warm-white item 6046, the boards with an LED in yellow item 6007, white item 6008, warm-white item 6006, boards with two LEDs in yellow item 6018, white item 6017 and warm-white item 6021 or the LED with TV simulation item 5079. Light boxes should be fixed inside the house behind the windows. Light is prevented from shining through. Also suitable for TT and N buildings. Dimensions light boxes: L 1,7 x W 1,8 x H 2,6 cm, L 1,7 x W 1,6 x H 2,1 cm, L 1,7 x W 1,2 x H 1,9 cm, L 1,7 x W 1,4 x H 2,3 cm.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Integrated multi protocol digital decoder for DCC/MM provides for an authentic arm movement. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. In its delivery status, the bouncing is already adjusted. The compact overfloor drive is includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. With powerful low noise drive. Signal aspects Hp0 und Hp2. Height: 10,3 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available