4602 H0 Colour light departure signal SBB Type N

The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm

available

Prototypical brass mast with base socket for easy mounting. Maintenance free by LED lighting. Favourable set with 6 lamps item-No. 6090 for the price of 5. Height: 10 cm.

available

The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm

available

Perfect house illumination for all kinds of buildings. 2 LEDs on one thin board to fasten under the roof, maintenance free. Suitable for house illumination starter set item 6005.

available

Ideal for use with the floor interior lighting item 6045. The LEDs can be precisely glued into the racks for individual illuminating of entire floors or individual single windows in buildings of all kinds. Each one LED provides the right brightness. Also available as item 6047 yellow and item 6048 white LED. Same for light boxes of house illumination starter set item 6005.

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. Signal aspects Hp0 and Hp2. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.

available