Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 Colour light departure signal with distant signal and multiplex-technology

4726 H0 Colour light departure signal with distant signal and multiplex-technology

€58.50*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 4726

weee DE86057721

Product information "H0 Colour light departure signal with distant signal and multiplex-technology"

Signal in standard construction with filigree latticed brass mast. Maintenance free LED lighting. White LEDs for signal aspect Sh1 (shunting trip). Very easy and safe connection via only one plug socket. Required multiplexer item 5229 or 52292 for analogue (limited) and ­digital model train layouts. With base socket for easy installation and connection. With plug and 10 LEDs, maintenance free. Signal aspects Hp0, Hp0/Sh1, Hp1, Hp2, Vr0, Vr1 and Vr2. Height: 7,9 cm.

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
4726 ( 925.03 kb )

Passende Artikel

Double multiplexer for 2 colour light signals with multiplex-technology
52292 Double multiplexer for 2 colour light signals with multiplex-technology
Control module with integrated digital decoder (MM/ DCC) is for 2 Viessmann home signals with multiplex-technology, e. g. Ks-signals items 4042 – 4046 and standard light signals items 4721 – 4728 and is the best control for Viessmann signal bridge item 4750 equipped with signal heads items 4750 – 4753. The module controls 2 independent home signals and automatically identifies the connected signals. In case that home- and distant signal are one unit (Hp/Vr- combination), the signal heads can be controlled separately with an own address. Block distances operation with track control. Viessmann SpeedBus (LSB) provides comfortable connection with Viessmann Commander. Connected signal is recognized and configurated accordingly. Module has no Signalbus but offers control of distant signal by free addresses. The module recognizes the task of home signal and controls the distant signal. Connection of the signal is done by only one track connection. Smooth change of lighting between the signal pictures and more features are adjustable. For automatic train control item 5227 relay, double, monostable, 2 x 2UM direct connection is possible.

€82.95*

currently not available

Go to retailer search
H0 Signal base, 2 pieces H0 Signal base, 2 pieces
4733 H0 Signal base, 2 pieces
Suitable for road bed tracks Märklin C-track, Trix, Roco GEO-Line and Piko A-track. Compatible with all Viessmann H0 light signals with base socket.L 3.06 x W 2 x H 0.95 cm

€9.50*

available

Stk

Customers also bought

H0 Colour light block signal
4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*

available

Stk
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

available

Stk
H0 Coach lighting, 11 LEDs warm-white
5050 H0 Coach lighting, 11 LEDs warm-white
Coach lighting with maintenance free, bright LEDs. Brightness adjustable by potentiometer. Can be used in any lighting prepared coaches of all manufacturers. By shortening the circuit board, it can be adapted to various waggon lengths. Constant power supply integrated, prepared for flicker-protection. Power supply by grinder / point unit or conducting couplers items 5048/5071. Suitable for DC, AC or digital power. Maximum power input 38 mA. Dimensions: L 25,4 x W 0,7 cm.

€16.50*

available

Stk
Universal on-off switch
5550 Universal on-off switch
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.

€23.95*

available

Stk
H0 Conducting couplers, 2-pole, 1 pair
5048 H0 Conducting couplers, 2-pole, 1 pair
These couplers base on the Fleischmann Profi plug-in coupling 6515 and provide power transmission up to 1 A each contact. They are also vertically self-centering, which effectively prevents unintended uncoupling (e. g. at the transition from horizontal track to a gradient). Uncoupling – even delayed uncoupling – is possible. This allows you to provide an easy power supply system for the entire train. As a result, pick-ups are not required for all coaches. This in turn reduces the load to be drawn by the locomotive. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362-coupling shaft. The thin cables (0,6 mm) allow a very easy mounting.

€19.50*

available

Stk