4752 H0 Block signal heads with distant signal and multiplex-technology, 2 pieces

Filigree brazen parts and light signal heads with powerful LED-lighting make the signal bridge an eye-catcher. Signal heads are equipped with plug-in connection and are switchable (signal heads items 4751 – 4753) to adjust to modified track middle radius (4,5 – 7,7 cm.). Equipped with 2 entry signals as well as distance signals of build 69. Can be mounted wherever there is not enough space for 2 signal masts. Cables are placed invisibly in authentic varnished bridge. Connection to the control units Viessmann multiplexer Items 5229 or 52292. Dimensions: L 11,83 x W 3,41 x H 11,21 cm.

available

The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

currently not available

Kit. Without function.Ø 3.7 cm / H 57.5 cmLevel of difficulty: 2 (advanced)

available

It is quite busy at this nostalgic ARAL-petrol station with the feeling of the late 50s and early 60s. The friendly attendant offers his service and in the workshop the cars are repaired immediately. In the kit many decoration details are included. We thank BP Germany as well as the Historical Archiv of BP/ARAL for their support. Dimensions: L 17,5 x W 15 x H 8 cm.

available

These couplers allow you to provide an easy power supply system for the entire train. The couplers are equipped completely with 2 connection cables and fit into the standard NEM 362 coupling shaft. The couplers are contact-proof and cannot be uncoupled automatically, yet easy to separate and to couple. The thin cables (0.6 mm) allow a very easy mounting. Current consumption: max. 750 mA.Contents: 3 pairs with 3 adapters each (S: norm, M: +0.3 mm and L: +0.6 mm).

available

With filigree latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free by LED lighting. Signal aspects Hp0 and Hp1. Height: 10,3 cm.

available