4643 H0 Colour light departure signal, aspect: 1/2/3 short mast SBB/RhB, type L

The Swiss colour light signals type L, are part of the classic colour light signals used in Swiss railway operations. They are characterized by their compact design and clear, easily recognizable displays. The brass mast is produced using filigree photo-etching techniques. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance-free by LED lighting. Easy installation and connection with cylinder base socket. Height: 6,7 cm

currently not available

The Swiss colour light signals type L, are part of the classic colour light signals used in Swiss railway operations. They are characterized by their compact design and clear, easily recognizable displays. The brass mast is produced using filigree photo-etching techniques. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance-free by LED lighting. Easy installation and connection with cylinder base socket. Height: 6 cm

currently not available

The self adhesive magnetic tape is polarized on its surface (south pole on top). It leads the guiding magnets of the CarMotion vehicles. Depending on the type of road, it is integrated into a prefabricated road system or built into the layout plate with the help of a surface milling machine.L 500 x W 0.3 x H 0.05 cm

available

The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm

available

These LED light strips are suitable for stationary lighting. They consist of flexible material and are coated on their backs with adhesive tape. Thus they can easily be mounted even in bent condition. The LED strips are intended to be used with power modules 5215, 5225 or 5205 or with DC voltages of 18V or higher. The enclosed resistors allow for brightness adjustment.The max. contact load per segment is 25 mA, the load for the total strip must not exceed 190 mA. Operating voltage with serial resistor: 24V =. Incl. connection cable. The light strip equipped with 42 LEDs consists of 7 separable segments and has a total length of approx. 250 mm. Each segment is approx. 35 mm long and has 6 warm-white LEDs (2200K). The segments are connected in parallel.

available

Kit. L 12.0 x W 9.0 x H 7.0 cmLevel of difficulty: 2 (advanced)

available