4622 H0 Colour light distant signal SBB type N

The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm

available

The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The brass mast is produced with filigree photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket.Height: 7.8 cm

available

The set contains 4 colour light signals, each with a red and yellow LED and a St. Andrew`s cross as well as an electronic unit. The lights show yellow for 2 seconds, followed by red. The red light turns off after the train has passed the level crossing. Maintenance free by LED lighting. Height: 3,5 cm.

available

The N-type signaling system was introduced in 1986, gradually replacing the signals of the L-type on the standard gauge network, especially on the SBB and BLS. Each of these signals can serve as a distant signal. The filigree brass mast is produced with photo-etching technique. Authentic varnishing. Suitable for all analogue and digital systems. Maintenance free by LED lighting. Easy mounting and connection with cylinder base socket. Height: 7.7 cm

available

For the proper installation of the magnetic tape, items 8429 and 8430 in freely designed road courses to avoid collision with oncoming traffic. Milling of the groove for the magnetic tape is done along the marking.

available

Level crossing with 2 barriers, powered by 2 separate underfloor drive units. The drive provides slow movement during opening and closing of the barriers. The street can cross an unlimited number of tracks. Board crossing pieces, access ramps and printed road signs are attached. Integrated decoder is multi protocol and recognizes DCC and MM format. For automatic use switching tracks resp. switching contacts item 6840 are required. More information is provided in our signal book item 5299 German version. To build four-arm barriers, item 5107 model with mirrored imprint is required. More connectors offered with items 5105 (2 rail) and 5106 (3 rail). When used with CarMotion, adjustments regarding the road width and the steepness of the ramp are necessary, as well as the installation of magnetic tape, since this product was not originally designed for CarMotion.Suitable sound module: item 5556. Barrier length: ca. 6,3 cm.

available