Skip to main content Skip to search Skip to main navigation

Product information "H0 DOLL pole trailer "

Kit.
L 16.0 x W 4.0 x H 4.7 – 13.0 cm
Level of difficulty: 2 (advanced)

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!



Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Passende Artikel

Average rating of 0 out of 5 stars

8424 H0 Retrofit set steered rear axles for semitrailers
These steered axles for semitrailers are excellently suited for driving smaller radii even with longer semitrailers, without having to widen the roads very much in the curves or the semitrailers getting too far into the lane of opposite traffic. Precisely guided by ball bearing mounted cogwheel mechanism.

€43.50*

currently not available

Average rating of 0 out of 5 stars

12254 H0 MB TRAC with front shield, wood-pulling shovel and rear winch
Kit. Prototype data: The double drum winch 8002 TL of company IGLAND has a pulling power of 2 x 8.0 t and a max. rope capacity of 2 x 107.0 m for a rope diameter of 12.0 mm. With a power requirement of 53 HP per drum the MB TRAC is the correct tractor to drive the winch. As the winch is mounted in the rear linkage only, the tractor can still be used in agriculture. With the shield, which can be mounted to any front loader, the wood can be sorted at the lumberyard. The kit includes 6 trunks.L 8.5 x W 3.0 x H 4.0 – 6.0 cm Level of difficulty: 2 (advanced)

€29.50*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Customers also bought

Average rating of 0 out of 5 stars

39995 Plastic glue liquid, with brush, 25 ml

Content: 0.025 l (€278.00* / 1 l)

€6.95*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 5 out of 5 stars

8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 0 out of 5 stars

4011 H0 Colour light block signal
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: item 5221. Height: 7,9 cm.

€19.50*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 0 out of 5 stars

38915 H0 Town wall with round tower in Weil
Kit. L 24.0 x W 14.0 x H 26.5 cmLevel of difficulty: 2 (advanced)

€32.95*

available

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Stk

Average rating of 0 out of 5 stars

16150 H0 Ballast collector MFS 100
Kit. The ballast collector units are suitable for any kind of bulk material and can be assembled into trains of any length. All conveyors are hydraulically driven. The energy is delivered by a diesel engine. Suitable for H0 buffer waggon.item 26264. With NEM shaft.Lob 26.3 cm / L 31.0 x W 3.5 x H 4.5 cmLevel of difficulty: 3 (professionals)

€69.95*

currently not available

Average rating of 0 out of 5 stars

38903 H0 Half-timbered house on market square Miltenberg
Kit. With connection system. Manufactured in two-colour injection moulding process.L 9.8 x W 11.0 x H 17.5 cmLevel of difficulty: 2 (advanced)

€32.50*

currently not available