11253 H0 LIEBHERR 974 with ram- and pulley attachment
€59.50
Delivery time: 2-4 Werktage
Article no.: 11253
Description
Product information "H0 LIEBHERR 974 with ram- and pulley attachment"
L 10.0 x W 5.0 x H 28.0 cm
Level of difficulty: 2 (advanced)
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Customers also bought
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. With base socket. Very simple mounting and wiring. With 6 LEDs, maintenance free. White LEDs for signal aspect Sh1 (shunting trip). Signal pictures Hp0, Hp0/Sh1, Hp1 und Hp2. Suitable control module: item 5223. Height: 7,9 cm.
available
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available
A compact module for easy connection and bright flicker-free LED lighting. The plug-in rail on the top allows a comfortable connection of 12 loads without soldering, just by plugging the leads of resistors and diodes into the sockets of the plug-in rail. Ideal for the interior lighting sets items 6045 – 6048. Cables for connection to a transformer are included. Input voltage 16 V AC, output voltage approx. 22 V DC, max. current 400 mA continuously, overcurrent protection. Plug-in rail is extendable, e. g. item 6049. Provides up to 25 LED lights. Dimensions (without mounting): L 3,7 x W 2,6 x H 2,2 cm.
available
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm
currently not available
Especially for a safe connection and current transmission.
available