11278 H0 LIEBHERR R992 Litronic with backhoe shovel

Kit. The model is equipped with chrome-plated rims and bumpers.L 4.6 x W 1.8 x H 1.5 cmLevel of difficulty: 2 (advanced)

available

This turnout is equipped with a powerful and low-noise drive featuring secure positioning achieved by a robust 10 mm motor with planetary gear. By rearranging the variable end stops, a left, right, or 3-way diversion can be selectively created. The electronics are housed compactly within the casing. The diverter can be controlled manually, via buttons/switches or our InduktivCharger, item 8408, enabling digital control capabilities. Like the vehicles, the turnout can be comfortably configured in the CarManager.

available

The remote control facilitates the control of the CarMotion vehicles on the layout as well as a simple configuration of the vehicle. For this purpose the remote control is directed towards the front part of the vehicle where its infrared sensors are located. Distances larger than 50 cm require a very precise alignment of the remote control with the vehicle. Under favourable conditions a distance of up to 1 m is possible. The device is designed for a local control of the vehicles – driving on sight, so to speak. It can be used to start a vehicle – even from an active stop coil – and to stop it at any time. Furthermore, it is possible to set the vehicle speed and other vehicle functions such as lighting, blinking lights etc. For these basic configurations, it is not necessary to connect the vehicle to the programming device. Moreover, the remote control complements the vehicle control via the magnet arrangement underneath the roadway – thus the user can carry out complex operations and has further options to intervene.

available

Kit. L 7.0 x W 3.5 x H 5.5 – 11.0 cmLevel of difficulty: 2 (advanced)

available

Complete kit. Maintenance free by LED lighting. Prototypical brass mast with base socket for easy mounting. Mounting without soldering and any tool. Street light epochs III – VI. Height: 10 cm.

available

Kit. Prototype data: In the early sixities the FUCHS company introduced the excavator types 300 and 301, which were widely disseminated. Until today some excavators survived as types of cranes and grippers. Used to transship wood, coal and scrap metal also in agriculture or at the railway the excavators are still doing their service. The version with increased cabin allows the driver the overview above high ship‘s sides or compartment walls.L 4.0 x W 3.0 x H 4.5 – 8.5 cm Level of difficulty: 2 (advanced)

available