14129 H0 MB round bonnet LAK1620 with tipper platform
Description
Product information "H0 MB round bonnet LAK1620 with tipper platform"
L 8.8 x W 3.5 x H 3.2 – 5.3 cm
Level of difficulty: 2 (advanced)
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Reviews 0
Login
Customers also bought
Functional kit. The ZL1801 wheel loader is the standard wheel loader at the THW. Through a changing system it is possible to mount special accessories such as pallet forks, hydraulic hammers or special blades, in addition to the attached standard bucket with a capacity of 1.8 m³. With the LED headlight the working area is illuminated. The ZL1801 is thus able to move different materials weighing up to 6.5 t.L 6.2 x W 2.8 x H 3.8 – 8.5 cmDimensions: L 6,2 x W 2,8 x H 3,8 – 8,5 cmLevel of difficulty: 2 (advanced)
available
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm
currently not available
Kit. L 280.0 x W 0.2 x H 2.5 cmLevel of difficulty: 1 (beginners)
Content: 2.8 m (€7.68 / 1 m)
currently not available
Kit. L 55.5 x W 16.0 x H 16.5 cmLevel of difficulty: 2 (advanced)
available
With this kit you can equip your CarMotion trucks in the event that the original tyres are damaged or worn out. The tyres are characterized by good traction, smooth running and tracking stability, making them suitable for use on trailers as well.
available
With beam, filigree metal work. Middle crossarm: 3,4 cm. Height: 9,9 cm. Low priced pack with content of 10 pieces.
available