Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau
Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau

16082 Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau

€119.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 16082

Product information "Catenary maintenance vehicle MTW 100.083/1 DB Bahnbau"

Kit. Prototype data: 4-axle motor PLASSER & THEURER motor tower vehicle type MTW 100.083/1 for mounting of catenary systems, maintenance and inspection of overhead lines and for the transport of people and material.
With NEM shaft.
Lob 19.1 x W 4.0 x H 6.0 cm
Level of difficulty: 2 (advanced)

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
16082 ( 3,478.76 kb )

Customers also bought

H0 Electrical substation Baden-Baden with electric lightning
39840 H0 Electrical substation Baden-Baden with electric lightning
Functional kit. 3 pre-assembled blue LEDs generate an arc discharge effect with attached electronics. With connection system.L 53.0 x W 33.0 x H 25.0 cmLevel of difficulty: 2 (advanced)

€92.50*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

available

Stk
InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

currently not available

Go to retailer search
H0 Diesel fuel station
39430 H0 Diesel fuel station
Kit. L 11.5 x W 10.0 x H 4.0 cmLevel of difficulty: 1 (beginners)

€15.50*

few available

Stk
H0 Bumper with LED lighting for trailers and short semitrailers
8420 H0 Bumper with LED lighting for trailers and short semitrailers
With this set you can retrofit your trailers and short semitrailers of kibri and other manufacturers to be able to use the full scope of functions of the CarMotion vehicles. Contents: 1 bumper with 5-pole connection plug and infrared transmitter for distance control.

€21.95*

available

Stk
H0 ROBEL maintenance vehicle 54.22
16100 H0 ROBEL maintenance vehicle 54.22
Kit. Prototype data: Length approx. 11.3 m, height approx. 3.7 m, width approx. 2.9 m, wheelbase 6.5 m. Water cooled diesel engine, 440 kW/598 HP at 1900 rpm, max. speed 129 km/h. Starting tractive effort 90 kN, towing capacity 2,000 t, net weight approx. 25,000 kg, max. weight (fully loaded) approx. 30,000 kg. PALFINGER loading crane type PK 19000. Suitable for waggon 55.54 with construction equipment item 16308. Lob 13.4 x W 3.6 – 7.0 x H 4.8 – 15.5 cmLevel of difficulty: 3 (professionals)

€76.50*

available

Stk