26100 H0 ROBEL maintenance vehicle, finished model
Description
Product information "H0 ROBEL maintenance vehicle, finished model"
Lob 13.4 x W 3.6 – 7.0 x H 4.8 – 15.5 cm
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Reviews 0
Login
Passende Artikel
The patented flat drive unit, similar to the one used in the ROBEL, is a perfect fit for the flat construction of this waggon. Between 1958 and 1967 the DB purchased more than 14 200 2-axle platform waggons with tiltable side and end boards. They serve for transporting vehicles and large volume freight. As from 1965 the vehicles without side stakes were classified as Kls. The models are suitable for epochs III – VI. Length over buffers: 13 860 mm.Empty weight: 12 100 kg, max. load 27,5 t. With its fine-tuned movement and sound, digital or analogue, this model can fulfil the wishes of many enthusiasts. A sound module providing different sounds and noises is included, and is configurable for a typical diesel- or steam locomotive. RailCom capable digital decoder for DCC/MM and analogue operation, with integrated power-pack for supplying the locomotive while driving over turnouts or tracks with poor electrical contact. Socket for rear lights or other switchable functions are available at both ends. Functions in analogue mode: - Driving forward/reverse, sound active (type and volume configurable via CVs) - Light outputs activeFunctions in digital mode: - Driving forward/reverse - Functions can be separately switched: Sound (type and volume configurable via CVs), signal horn, lightsSockets for NEM 362 couplers available at both ends. One rear light included. With patented pick up shoe. Dimensions: Lob 15,9 x W 3,5 x H 2 cm.
currently not available
Customers also bought
Finished model. The model is equipped with ingenious close-coupling kinematics and NEM shaft. Equipped with DC wheelset. Lob 15.8 x W 3.5 x H 5.5 cm
available
Finished model. Low side car equipped with 3 cable reels from GleisBau series. Equipped with DC wheelset. Equipped with ingenious close-coupling kinematics and NEM shaft.Lob 15.8 x W 3.5 x H 4.8 cm
available
Kit. With NEM shaft.Lob 39.6 x W 3.3 x H 5.0 cmLevel of difficulty: 3 (professionals)
available
The remote control facilitates the control of the CarMotion vehicles on the layout as well as a simple configuration of the vehicle. For this purpose the remote control is directed towards the front part of the vehicle where its infrared sensors are located. Distances larger than 50 cm require a very precise alignment of the remote control with the vehicle. Under favourable conditions a distance of up to 1 m is possible. The device is designed for a local control of the vehicles – driving on sight, so to speak. It can be used to start a vehicle – even from an active stop coil – and to stop it at any time. Furthermore, it is possible to set the vehicle speed and other vehicle functions such as lighting, blinking lights etc. For these basic configurations, it is not necessary to connect the vehicle to the programming device. Moreover, the remote control complements the vehicle control via the magnet arrangement underneath the roadway – thus the user can carry out complex operations and has further options to intervene.
available
Kit. Prototype data: STORK caravan L 13 m, 4 pull-out bay windows. Max. speed 80 km/h, rear carriage pivotable, total weight 16,000 kg.L 15.0 –17.0 x W 2.8 – 4.5 x H 4.5 cmL 17.2 x W 5.5 x H 7.0 cmLevel of difficulty: 2 (advanced)
available
Kit.Driving position L 12.0 x W 3.5 x H 4.2 cm Extended L 10.0 x W 9.0 x H 47.0 cmLevel of difficulty: 3 (professionals)
available