Specialist dealer search

Download Center

Service / Help

Experience since 1988

Go to homepage
€0.00*
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper
H0 MAGIRUS with MEILLER tipper

14031 H0 MAGIRUS with MEILLER tipper

€23.95*

Prices incl. VAT plus shipping costs

Create review

Delivery time: 2-4 Werktage

Stk
Article no.: 14031

Product information "H0 MAGIRUS with MEILLER tipper "

Kit.
L 9.5 x W 3.0 x H 3.7 – 7.5 cm
Level of difficulty: 2 (advanced)

Warn- und Sicherheitshinweise

Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!


Hersteller

Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

.PDF
14031 ( 3,492.96 kb )

Customers also bought

InduktivCharger
8408 InduktivCharger
The InduktivCharger enables wireless recharging of vehicles through inductive communication. Vehicles come to a halt on the module and automatically position themselves over the charging coil, allowing charging currents to be self-regulated. These modules are particularly suitable for locations with longer dwell times, such as traffic lights or level crossings. Multiple modules can be interconnected to autonomously guide vehicles to charging positions with upcoming software updates. A control output for the motorized 2/3-way turnout, item 8448, which can also control servos, complements the capabilities. For trucks, the ratio of driving time to charging time is approximately 3 to 1, allowing for virtually unlimited driving time. The InduktivCharger can also switch vehicles with receiver coils on and off. Vehicles need to be retrofitted with the receiver coil, item 8440.Diameter charging coil: 40 mm, diameter electronics: 30 mm, height: 60 mm

€129.95*

available

Stk
Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
8440 Receiver coil for retrofitting CarMotion trucks and buses, inductive charging
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm

€9.95*

available

Stk
H0 MAGIRUS DEUTZ with MEILLER dumpster
14036 H0 MAGIRUS DEUTZ with MEILLER dumpster
Kit. L 13.0 x W 3.0 x H 3.7 – 8.5 cmLevel of difficulty: 2 (advanced)

€26.95*

available

Stk
H0 House Ballhausplatz
38383 H0 House Ballhausplatz
Kit. With connection system. Manufactured in two-colour injection moulding process.L 13.0 x W 13.5 x H 19.0 cmLevel of difficulty: 2 (advanced)

€58.50*

available

Stk
H0 Timber-framed tower with gate
38470 H0 Timber-framed tower with gate
Kit. This tower was created based on the witch-tower in Chatenois in Alsace/France.Passage height 5.5 cm / Passage width 4.0 – 4.8 cmLevel of difficulty: 2 (advanced)

€31.95*

available

Stk
H0 Ballast collector MFS 100
16150 H0 Ballast collector MFS 100
Kit. The ballast collector units are suitable for any kind of bulk material and can be assembled into trains of any length. All conveyors are hydraulically driven. The energy is delivered by a diesel engine. Suitable for H0 buffer waggon.item 26264. With NEM shaft.Lob 26.3 cm / L 31.0 x W 3.5 x H 4.5 cmLevel of difficulty: 3 (professionals)

€69.95*

currently not available

Go to retailer search