37668 N/Z Werra bridge, single or double track
€18.95
Delivery time: 2-4 Werktage
Article no.: 37668
Description
Product information "N/Z Werra bridge, single or double track"
Single track L 17.8 x W 6.0 x H 5.6 cm
Double track L 17.8 x W 9.3 x H 5.6 cm
Passage height 3.5 cm / Passage width 15.0 cm
Level of difficulty: 2 (advanced)
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Passende Artikel
Catenary system for one oval track (120 cm x 54 cm), consisting of 22 masts item 4310, 16 catenary wires 8,9 cm of item 4330, 6 catenary wires 22,2 cm of item 4331 and one height marker item 4396. To use the catenary system as a power supply, the following additonal items are required: Power mast item 4311 and Y-wires item 4370, which ensure a reliable connection between the wires.
available
The power mast offers a separated application of the upper contact wire by which the different power supplies can be assigned. So single sections can be switched currentless and fundamental frequency clocking is possible. With beam and connection wire, filigree metal work. Middle crosarm: 1,8 cm. Height: 4,55 cm.
available
Ready-to-install catenary wire with fixing holder for easy hooking onto the beam. Diameter 0,4 mm.
available
Customers also bought
Kit. Suitable for all common track systems, Z gauge and operation with catenary. Bridgeheads included. Optional single or double track construction. This bridge type is called iron tied arch bridge. Single track L 35.2 x W 5.8 x H 10.5 cmDouble track L 35.2 x W 9.2 x H 10.5 cmPassage height 4.0 cm / Passage width 32.8 cmTrack height 4.7 cmLevel of difficulty: 2 (advanced)
available
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
The receiver coil enhances vehicles with inductive charging capabilities and necessary communication. It effortlessly clips onto the transmission block and is connected to the vehicle board through a two-pole plug connection. When used in conjunction with the InduktivCharger, item 8408, it enables unlimited runtime without user intervention. Vehicles can be powered on and off at inductive charging stations. The runtime-to-charging-time ratio is approximately 3:1, depending on system and vehicle conditions. Suitable for all CarMotion system vehicles without built-in receiver coils.Outer dimensions: L 2.4 x W 1.3 x H 0.27 cm
currently not available
Kit. Manufactured in two-colour injection moulding process.L 101.5 x W 3.8 x H 8.0 cmLevel of difficulty: 2 (advanced)
available
Kit. L 280.0 x W 0.2 x H 2.5 cmLevel of difficulty: 1 (beginners)
Content: 2.8 m (€7.68 / 1 m)
currently not available
The module allows the transmission of a variety of commands to CarMotion vehicles via infrared signals. These commands range from simple blinking to deceleration and stopping of CarMotion vehicles, for example in front of traffic lights. The two infrared transmitter diodes can be inconspicuously positioned alongside the road or placed horizontally in a small cut-out in the roadway or roadside. Like the vehicles, the module can be conveniently configured in the CarManager. All macros stored in the vehicles can be invoked by the module, including those that cannot be accessed through magnetic sequences for technical reasons. The two IR LEDs transmit different signals depending on the selected operating mode. One of the numerous applications is precise stopping in front of a traffic light or similar. The first IR LED is positioned some distance before the traffic light and sends the command for gradual deceleration when the traffic light is red. The vehicle then gently comes to a stop on an optional stop magnet (north pole). The second IR LED is located in close proximity to the traffic light and sends the start command when the light is green. The module is directly controlled by the Viessmann traffic light controller, items 5094 or 5095, or the level crossing items 5104 and 510) via the control input. The input also allows control of the module through a switch, relay contact, or DCC switch command using a suitable central control unit. Simple commands can also be generated by turning the module on and off, for example, to send blink commands only when a corresponding turnout is set.Board dimensions with cable outlet: ca. L 45 x W 5 x H 5 mmRecommended installation space (programming plug): ca. L 55 x W 5 x H 5 mmCable length to the IR LEDs: each ca. 300 mmIR LED dimensions: ca. L 2 x W 1.2 x H 1.2 mm
available