1897 N Destination display with LED lighting
€19.95
Delivery time: 2-4 Werktage
Article no.: 1897
weee DE86057721
Product information "N Destination display with LED lighting"
Warn- und Sicherheitshinweise
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren!
Hersteller
Viessmann Modelltechnik GmbH
Bahnhofstr. 2 a
35116 Hatzfeld-Reddighausen
Kontakt
Customers also bought
With filigree latticed brass mast and authentic varnishing. Printed signal arms. Powerful low noise drive. Integrated multi protocol digital decoder for DCC/MM. Slow signal movement due to special underfloor drive unit. Even authentic single bouncing is individually adjustable. By factory setting the signal bouncing is adjusted. Compact overfloor drive is only 4,5 mm high and includes a decoder placed on the signal mast base. Maintenance free by LED lighting. Suitable for analogue and digital use. Configurable switching outputs can switch relays, e. g. for train control. Feedback via RailCom. For train control it is important to use a relay, due to the low maximum load of the contacts and the short pulse length, e. g. the electronic relay item 5552. Signal aspects Hp0 and Hp1. Height: 7,2 cm. Drive unit: L 3,5 x W 1,6 x H 0,45 cm.
available
4 switches providing comfortable switching of lights, signals and other elements using continuous current. It can also be used as a set of two double pole switches, with the use of the included couplings. Contact load: 2 A.
available
The practical 12-pin plug-in rail connects up to 12 power consumers – simply by jacks for plugging in the resistors and diodes. Suitable for using with LED-floor interior lighting items 6045 – 6048. No plugs, screw terminals or soldering required. In order to make even very thin cables and litz wires pluggable, we recommend the adapter pins for rails, item 6044. Dimensions: L 3,2 x W 2,1 x H 0,7 cm.
available
Ideal item to use with our light boxes of house lighting starter set, item 6005 to illuminate each single room or with light rails, item 6045 for floor interior lighting. One LED each, fastened to a small board, provides suitable brightness.
available
Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode. Dimensions: L 1,6 mm x W 0,8 mm.
available
Signal in standard construction. Filigree brass mast and authentic varnishing. With base socket for easy mounting. With 2 LEDs maintenance free. Signal aspects Hp0 and Hp1. Suitable control module: item 5221. Height: 4,4 cm.
available